Page 1
908-A + 908-3B + 908-CH SOFA & CHAISE
Side Arm-Lsf
1 pc
ASSEMBLY INSTRUCTION
Side Arm-Rsf
1 pc
This page lists all the contents
included in the box. Please take
the time to identify the hardware as
well as the individual components
to this product. As you unpack and
prepare for assembly, place the
contents on a carpeted or padded
area to protect them from damage.
B
CA
Sofa Seat Frame
1 pc
D
Sofa Back Frame
1 pc
1
1 pc
Chaise Seat
Frame
1 pc
F
G
E H
Chaise Back
Frame
Chaise Seat
Cushion
1 pc
I
Leg
J
JCBC Bolt
1/4" x 18mm
8 pcs
K
32 pcs
4 pcs
Seat Cushion
3 pcs
Back Cushion
Allen Key
4 x 65mm
1 pc
L
Page 2
1
Assemble Leg (J) into Chaise Seat Frame (E) by using JCBC Bolt (K) with Allen Key (L).
2
2
Attach Chaise Back Frame (F) to Chaise Seat Frame (E) by using brackets as drawing below.
Ensure brackets are attached
tightly.
E
L
J
K
E
F
The rear legs are
towards back side.
Page 3
3
Assemble Leg (J) into Sofa Seat Frame (C) by using JCBC Bolt (K) with Allen Key (L).
3
4
Attach Sofa Back Frame (D) to Sofa Seat Frame (C) by using brackets as drawing below.
K
L
J
C
Ensure brackets are attached
tightly.
D
C
The rear legs are
towards back side.
Page 4
4
5
6
Connect Chaise Seat Frame (E) & Sofa Seat Frame (C) by using brackets as drawing below.
7
Put on Back Cushion (H) & Seat Cushion (G) & Chaise Seat Cushion (I).
Ensure brackets are attached
tightly.
C
E
Attach Side Arm-RSF (A) & Side Arm-LSF (B) to Sofa Seat Frame (C) & Chaise Seat Frame (E)
by using brackets as drawing below.
C
E
A
B
G
H
I
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces
with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
Periodically check that all connections are tight.
Page 5
5
Furniture Care & Cleaning Instructions
Wood Furniture Care & Cleaning Instructions
To maintain the quality of your wood furniture, do not expose it to direct
sunlight or excessive temperatures; extreme changes in humidity can
cause warping. Always use coasters, pads, cloth or felt to protect the
furniture surface. Use protective mats under hot dishes. Use a protective
pad when writing with a pen. Lift objects rather than dragging them over
the furniture surface. Blot spills immediately with a clean cloth. Dust often
using a soft, clean, lint-free cloth. Avoid harsh fabrics, paper towels or
disposable dusting towels as they may scratch the surface. Use a
non-silicone and non-wax polish; do not use soap, water or wax.
Metal & Ceramic Furniture Care & Cleaning Instructions
To clean, wipe with a soft damp cloth. Avoid the use of chemical and
abrasive cleaners. Wipe up spills immediately. For glass tops and
shelves, glass cleaner may be used, but avoid spraying it onto the metal
or ceramic frame.
Wicker & Woven Furniture Care & Cleaning Instructions
For daily care, simply wipe clean using a soft, dry cloth. To protect the
finish, avoid the use of abrasive chemicals, harsh cleaners and rough
cleaning pads and polishes. To remove lodged debris, we recommend
using a vacuum with a brush attachment.
Leather Furniture Care & Cleaning Instructions
For minor spots and spills, immediately wipe with a soft white cloth
dampened with distilled water and let air-dry. Do not dry with hair dryers,
heaters, etc.
For spills of butter, oil or grease, wipe up any excess with a clean, dry
cloth. Do not apply water or try to wash the spot. Leave spot alone. The
spot should dissipate into leather after a short period of time.
To keep the leather supple and prevent fading, protect it from exposure to
direct sunlight and heating vents. Dust with a clean soft cloth. Vacuum
crevices regularly. Moisturize with an application of distilled water on a
soft clean cloth. Do not use the following products: Saddle soap, cleaning
solvents, furniture polish, oils, varnish, abrasive cleaners. In addition,
refer to specific care instructions provided with your furniture piece.
Loading...