Page 1
B
Arc Pipes Body
A
E133LT 3-LIGHT TREE FLOOR LAMP
1pc
C
Tube
D
Shade
E
Ring
G
Hand Screw
Ø5/32"x1/2"
F
Washer
Ø1/2"x1"
H I
Nut
1/2"x1/4"
Wrench
17mm
Base
ASSEMBLY INSTRUCTION
1pc 1pc 3pcs 3pcs
1pc 1pc 1pc 1pc
This page lists all the contents included in the box.
Please take the time to identify the hardware as well
as the individual components to this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
1
IMPORTANT SAFETY INSTRUCTIONS
THIS PORTABLE LAMP HAS A POLARIZED PLUG
(ONE BLADES WIDER THAN THE OTHER) AS A
SAFETY FEATURE TO REDUCE THE RISK OF
ELECTRIC SHOCK. THIS PLUG WILL FIT FULLY
AND BE INSERTED IN A POLARIZED OUTLET
ONLY ONE WAY. IF THE PLUG DOES NOT FIT
FULLY IN THE OUTLET, REVERSE THE PLUG. IF
IT STILL DOES NOT FIT, CONTACT A QUALIFIED
ELECTRICIAN. NEVER USE WITH AN EXTENSION
CORD UNLESS PLUG CAN BE FULLY INSERTED.
DO NOT ALTER THE PLUG.
Page 2
1
WRONG
OK
Insert the pole of the Tube (B) through the Base (C). Put the Washer (G) and the Nut (H)
onto the pole of the Tube (B) and tighten the Nut (H) by the Wrench (I). Link up the
connector 1 of the Arc Pipes Body (A) and the connector 2 of the Tube (B). Insert the bottom
of the Arc Pipes Body (A) into the Tube (B). Insert the Hand Screw (F) through the hole of
the Tube (B) to lock into the Arc Pipes Body (A) and tighten the Hand Screw (F).
A
B
C
F
G
H
I
2
1
2
Page 3
2
Attach the Shade (D) under to the holder of the Arc Pipes Body (A). Rotate to tighten the
Ring (E) onto the socket of the Arc Pipes Body (A) to secure the Shade (D).
D
E
A
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean
surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen
over time. Periodically check that all connections are tight.
3
D
Loading...