Page 1
A
Side Frame
B
Middle Frame
C
Top Stretcher
2pcs
1pc
4pcs
D
Bottom Stretcher
E
Cushion
F
Bolt
(In Other Carton)
1/4”x1/2"
2pcs
1pc
12pcs
G
Bolt
H
Flat Washer
I
Lock Washer
1/4”x1"
1/4”
1/4"
8pcs
8pcs
8pcs
J
Allen Wrench
1/4”
1pc
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly, place
the contents on a carpeted or padded area to
protect them from damage.
ASSEMBLY INSTRUCTION
E371-13 54.5"W BENCH BASE
1
Page 2
1
Attach side frame (A) and middle frame (B) to top stretcher (C) and bottom stretcher (D) by
using bolt (F) and allen wrench (J) as shown.
2
Attach top stretcher (C) and bottom stretcher (D) to middle frame (B) by using bolt (F) and
allen wrench (J). Then use bolt (F) and allen wrench (J) again, attach side frame (A) to top
stretcher (C) and bottom stretcher (D) as shown.
*** Do not tighten screws & bolts until the entire unit is completely assembled.
2
Page 3
3
Attach assembled metal base to cushion (E) by using bolt (G), lock washer (I), flat washer
(H) and allen wrench (J) as shown. Carefully turn the assembled unit upright.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or
damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
3
Loading...