Kingston SEDC1000H-800G User Manual
DCP1000 SSD
Extreme performance for data centers.
Kingston’s DCP1000 solid-state drive delivers up to 1.25 million IOPS from a single
device, with ultra-low transactional latency and high throughput, making it
ideal for data centers requiring extreme performance. It features ultra-fast NVMe
PCIe Gen 3.0 x8, speeds of up to 7GB/s and hardware-based pFail. DCP1000 has
exible drive topology and supports exible software RAID capability to save on
redundant hardware costs. It supports 800GB to 3.2TB
and can be optimized for performance or redundancy, and a single card can be
congured for RAID via the host software.
It’s fast and economical to deploy, using native in-box NVMe drivers specically
built for PCIe-attached SSDs, and it’s plug-and-play with all major operating
systems. It has UEFI boot support and low overhead architecture.
In addition to its standard electrolytic capacitor pFail design, DCP1000’s
enterprise-class features include next-gen ECC data protection and end-to-end
data path protection.
1
from a single HHHL card
kingston.com/ssd
> Extreme performance for data centers
> Flexible drive topology
> Fast and economical to deploy
> Enterprise-class SSD features
Features/specs on reverse >>
THIS DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE.
©2017 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved.
All trademarks and registered trademarks are the property of their respective owners. US
DCP1000 SSD
FEATURES/ BENEFITS
> Extreme data center SSD performance — DCP1000 features ultra-fast PCIe
Gen 3.0 x8, making it ideal for data centers requiring extreme performance.
> Outperforms legacy architectures — DCP1000 delivers impressive
performance with an ultra-low transactional latency.
1
> High capacity — With up to 3.2TB
state drive.
> Power failure protection — DCP1000 oers enterprise-class power failure
protection to maximize uptime.
SPECIFICATIONS
> Form factor Half-Height Half-Length PCIe (AIC)
> Interface Non-Volatile Memory Express (NVMe™) PCle Gen3 x 8 Lanes
> Capacities
> Sequential Read/Write
800GB – 6,800 / 5,000MB/s
1.6TB – 6,800 / 6,000MB/s
3.2TB – 6,800 / 6,000MB/s
> Steady-State Random 4k Read/Write
800GB – 900,000 / 145,000 IOPS
1.6TB – 1,100,000 / 200,000 IOPS
3.2TB – 1,000,000 / 180,000 IOPS
> Latency (Typical) Read/Write 100us / 30us
> Endurance: Terabytes Written (Whole Drive)4
800GB – 884TB
1.6TB – 1820TB
3.2TB – 3332TB
> Endurance: Terabytes Written
200GB – 187TB
400GB – 375TB
800GB – 697TB
> Enterprise SMART tools reliability tracking, usage statistics, life remaining, wear
leveling, temperature
> Power Consumption 35W (Active)
> Storage temperature -40°C~85°C
> Operating temperature 0°C~70°C
> Recommend Airow 35°C at 500LFM or 40°C at 600LFM
> Dimensions 168mm x 69mm x 18mm (exclude mounting bracket)
> Weight 209g
> Vibration operating 2.17G Peak (7–800Hz)
> Vibration non-operating 20G Peak (10–2000Hz)
> Power Loss Protection Yes
> MTBF 2 million hours
> Warranty/support
> Operational Environments
Windows 8.1, Windows 10, Windows Server 2012 R2, Windows 7 and Windows
Server 2008 R2 via updates or Hotx driver download, Linux Kernel 3.3 and higher,
FreeBSD 10.x/11, VMware vSphere 6.0 (vSphere 5.5 as download driver)
1
800GB, 1.6TB, 3.2TB
2
5
5
5
5
5
5
6
Limited 5-year warranty with free technical support
, DCP1000 is a high-capacity NVMe solid-
2
3
PART NUMBERS
SEDC1000H/800G 800GB
SEDC1000H/1600G 1.6TB
SEDC1000H/3200G 3.2TB
1 Some of the listed capacity on a Flash storage device is used for formatting and other functions and thus
is not available for data storage. As such, the actual available capacity for data storage is less than what is
listed on the products. For more information, go to Kingston’s Flash Memory Guide at kingston.com/
ashguide.
2 Performance varies by capacity. Combined performance measured across (4) physical drives. Based on
Kingston internal testing using SNIA Solid State Storage Test Specication Enterprise v1.1.
3 Average latency measured using FIO v2.15, 4KB random I/O at queue depth 1.
4 The total endurance of (4) physical drives.
5 Total Bytes Written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A).
6 Limited war ranty based on 5 year s or SSD “Life Remaining ” which can be found usin g the Kingston SSD
Manager (k ingston.com/SSDMa nager). A new, unused produc t will show a wear indicato r value of one
hundred (100), wherea s a product th at has reached it s endurance li mit of progra m erase cycl es will
show a wear indi cator value of one (1). If the usag e of one or more of the f our (4) individual M. 2 SSDs that
make up the DCP100 0 shows a wear indicator valu e of one (1) the produc t is no longer covered un der
warrant y. 1). See kingston .com/wa for details
MK D-359 .1
Loading...