Memory Module Specification
|
KVR667D2E5/1GI |
|
1GB 128M x 72-Bit DDR2-667 |
DESCRIPTION: |
CL5 ECC 240-Pin DIMM |
|
This document describes ValueRAM's 128M x 72-bit 1GB (1024MB) DDR2-667 CL5 SDRAM (Synchronous DRAM) ECC "Intel Certified" memory module. The components on this module include eighteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR2-667 SDRAM in FBGA packages. This 240-pin DIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as follows:
FEATURES:
|
Clock Cycle Time (tCK) CL=5 |
3ns (min.) / 8ns (max.) |
|
||
|
Row Cycle Time (tRC) |
54ns (min.) |
|
||
|
Refresh to Active/Refresh Command Time (tRFC) |
105ns |
|
||
|
Row Active Time (tRAS) |
39ns (min.) / 70,000ns (max.) |
|
||
|
Single Power Supply of |
+1.8V (+/- .1V) |
|
||
|
Power |
2.106 W (operating) |
|
||
|
UL Rating |
94 V - 0 |
|
Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.250" (31.75mm).
Units : Millimeters
133.35 |
4.00 |
|||
|
|
|
|
|
30.00
1.27 ± 0.10
AB
63.00 |
55.00 |
3.00
|
|
5.00 |
|
|
4.00 |
2.50±0.20 |
0.80±0.05 |
||||
4.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.80 |
|
0.20 |
|
|
|
|
|
2.50 |
1.50±0.10 |
|
1.00 |
4.00 |
|
|
|
Detail A Detail B
Figure 1: KVR667D2E5/1GI 240-Pin DIMM
Document No. VALUERAM0505-001.A00 |
08/28/06 |