Kingston KVR533D2S4-2G User Manual

Memory Module Specications

KVR533D2S4/2G

2GB 256M x 64-Bit DDR2-533
CL4 200-Pin SODIMM

DESCRIPTION

This document describes ValueRAM’s 256M x 64-bit 2GB

(2048MB) DDR2-533 CL4 SDRAM (Synchronous DRAM)

memory module. The components on this module include

sixteen stacked 128M x 8-bit DDR2-533 SDRAM. This 200-

pin SODIMM uses gold contact ngers and requires +1.8V.

The electrical and mechanical specications are as follows:

Note: The module dened in this data sheet is one of several congurations available under this part number. While all congurations are compatible, the DRAM
combination and/or the module height may vary from what is described here.

Figure 1: KVR533D2S4/2G 200-Pin SODIMM

SPECIFICATIONS

Clock Cycle Time (tCK) CL=4 3.75ns (min.) / 8ns (max.)

Row Cycle Time (tRC) 55ns (min.)

Refresh to Active/Refresh 127.5ns
Command Time (tRFC)

Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.)

Single Power Supply of +1.8V (+/- .1V)

Power 1.872 W (operating)

UL Rating 94 V - 0

Kingston.com Document No. VALUERAM0523-001.B00 10/22/06