Kingston KVR400X64C3A512BK User Manual

Memory Module Specification
KVR400X64C3A/512
512MB 64M x 64-Bit DDR400
CL3 184-Pin DIMM
DESCRIPTION:
This document describes ValueRAM's 64M x 64-bit (512MB) DDR400 CL3 SDRAM (S ynchronous DRAM) memory module. The components on this module include sixteen 32M x 8-bit (8M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical and mechanical specifications are as follows:
FEATURES:
Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.250" (31.75mm).
1.250
(31.75)
(17.80)
0.700
0.393
(10.00)
0.000
(00.00)
1
0.000
(00.00)
0.26
(6.62)
2.175
0.250
(6.350)
0.071 (1.80)
0.157 (4.00)
Units : Inches (Millimeters)
0.100
0.1496 (3.80)
(2.50 )
2.886
(73.30)
0.039 ± 0.002
(1.000 ± 0.050)
0.0078 ±0.006
(0.20 ±0.15)
0.050
(1.270)
0.0787 (2.00)
0.1575 (4.00)
0.118 (3.00)
5.250 (133.35)
Figure 1: KVR400X64C3A/512 184-Pin DIMM
Document No. VALUERAM0295-001.B00
02/10/04
Loading...