Kingston KVR400D2S8R3K22G User Manual

Memory Module Specification

KVR400D2S8R3K2/2G

2GB (1GB 128M x 72-Bit x 2 pcs.) DDR2-400

CL3 Registered 240-Pin ECC DIMM Kit

DESCRIPTION:

ValueRAM's KVR400D2S8R3K2/2G is a kit of two 128M x 72-bit 1GB (1024MB) DDR2-400
CL3 SDRAM (Synchronous DRAM) "single rank" registered ECC memory modules.Total kit
capacity is 2GB (2048MB). The components on each module include nine 128M x 8-bit (16M
x 8-bit x 8 Bank) DDR2-400 SDRAM in FBGA packages. Each 240-pin DIMM uses gold
contact fingers and requires +1.8V. The electrical and mechanical specifications are as
follows:

FEATURES:

Clock Cycle Time (tCK) CL=3 5ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 55ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 127.5ns
Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 2.335 W (operating per module)
UL Rating 94 V - 0

Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).

(units = millimeters)

Figure 1: KVR400D2S8R3K2/2G 240-Pin DIMM

Document No. VALUERAM0466-001.A00

09/26/05