Kingston KVR400D2S4R3K24G User Manual

Memory Module Specification

KVR400D2S4R3K2/4G

4GB (2GB 256M x 72-Bit x 2 pcs.) DDR2-400

CL3 Registered 240-Pin ECC DIMM Kit

DESCRIPTION:

ValueRAM's KVR400D2S4R3K2/4G is a kit of two 256M x 72-bit 2GB (2048MB) DDR2-400
CL3 SDRAM (Synchronous DRAM) "single rank" registered ECC memory modules. Total kit
capacity is 4GB (4096MB). The components on each module include eighteen 256M x 4-bit
(32M x 4-bit x 8 Bank) DDR2-400 SDRAM in FBGA packages. Each 240-pin DIMM uses gold
contact fingers and requires +1.8V. The electrical and mechanical specifications are as
follows:

FEATURES:

Clock Cycle Time (tCK) CL=3 5ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 60ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 127.5ns
Row Active Time (tRAS) 45ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 3.888 W (operating per module)
UL Rating 94 V - 0

Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).

(Units = millimeters)

Figure 1: KVR400D2S4R3K2/4G 240-Pin DIMM

Document No. VALUERAM0394-001.B00

06/23/06