Kingston KVR400D2S4R32G User Manual

Memory Module Specification

KVR400D2S4R3/2G

2GB 256M x 72-Bit DDR2-400

DESCRIPTION:

This document describes ValueRAM's 256M x 72-bit 2GB (2048MB) DDR2-400 CL3
SDRAM (Synchronous DRAM) "single rank" registered ECC memory module.The compo­nents on this module include eighteen 256M x 4-bit (32M x 4-bit x 8 Bank) DDR2-400
SDRAM in FBGA packages. This 240-pin DIMM uses gold contact fingers and requires
+1.8V. The electrical and mechanical specifications are as follows:

FEATURES:

Clock Cycle Time (tCK) CL=3 5ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 60ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 127.5ns
Row Active Time (tRAS) 45ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 3.888 W (operating)
UL Rating 94 V - 0

CL3 Registered 240-Pin ECC DIMM

Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).

(Units = millimeters)

Figure 1: KVR400D2S4R3/2G 240-Pin DIMM

Document No. VALUERAM0393-001.C00

06/23/06