Memory Module Specification
KVR400D2N3K2/2G
2GB (1GB 128M x 64-Bit x 2 pcs.)
DDR2-400 CL3 240-Pin DIMM Kit
DESCRIPTION:
ValueRAM's KVR400D2N3K2/2G is a kit of two 128M x 64-bit 1GB (1024MB) DDR2-400
CL3 SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 2GB (2048MB).
The components on each module include eight 128M x 8-bit DDR2-400 SDRAM in FBGA
packages. This 240-pin DIMM uses gold contact fingers and requires +1.8V. The electrical and
mechanical specifications are as follows:
FEATURES:
Clock Cycle Time (tCK) CL=3 5ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 55ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 127.5ns
Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 1.025 W (operating per module)
UL Rating 94 V - 0
Note: The module defined in this data sheet is one of several configurations available under this part number.
While all configurations are compatible, the DRAM combination and/or the module height may vary from
what is described here.
Units : Millimeters
Figure 1: KVR400D2N3K2/2G 240-Pin DIMM
Document No. VALUERAM0404-001.B00
09/09/09