Kingston KVR400D2N32G User Manual

Memory Module Specification

KVR400D2N3/2G

2GB 256M x 64-Bit DDR2-400

DESCRIPTION:

This document describes ValueRAM's 256M x 64-bit (2GB) DDR2-400 CL3 SDRAM
(Synchronous DRAM) memory module. The components on this module include sixteen
128M x 8-bit (16M x 8-bit x 8 Bank) DDR2-400 SDRAM in FBGA packages. This 240-pin
DIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical
specifications are as follows:

FEATURES:

Clock Cycle Time (tCK) CL=3 5ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 55ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 127.5ns
Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 2.100 W (operating)
UL Rating 94 V - 0

CL3 240-Pin DIMM

Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).

4.00

133.35

131.35

128.95

A

2.50±0.20

SPD

B

55.00

0.80±0.05

0.20

10.00

(2)

2.50

63.00

5.00

4.00

3.80

Units : Millimeters

(2X)4.00

2.30

4.0

1.270 ± 0.10

3.00

30.00

17.80

2.50

1.50±0.10

Detail A

Figure 1: KVR400D2N3/2G 240-Pin DIMM

Document No. VALUERAM0470-001.B00

1.00

Detail B

4.00

06/23/06