Kingston KVR333X64C25K21G User Manual

Memory Module Specification

KVR333X64C25K2/1G

1GB (512MB 64M x 64-Bit x 2 pcs.)

DDR333 CL2.5 184-Pin DIMM Kit

DESCRIPTION:

ValueRAM's KVR333X64C25K2/1G is a kit of two 64M x 64-bit (512MB) DDR333 CL2.5 SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 1GB (1024MB). The components on each module include sixteen 32M x 8-bit (8M x 8-bit x 4 Bank) DDR333 SDRAM in TSOP packages. Each 184-pin DIMM uses gold contact fingers and requires +2.5V. The electrical and mechanical specifications are as follows:

FEATURES:

Clock Cycle Time (tCK) 6ns (min.) / 12ns (max.) Row Cycle Time (tRC) 60ns (min.) Refresh Row Cycle Time (tRFC) 72ns (min.) Row Active Time (tRAS) 42ns (min.) / 70,000ns (max.) Single Power Supply of +2.5V (+/- .25V) Power (IDD0) 2.900 W (operating) UL Rating 94 V - 0

Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.250" (31.75mm).

1.200"

1.250

(30.48)

(31.75)

(17.80)

0.700

0.393

(10.00)

0.000

(00.00)

0.000

(00.00)

0.26

(6.62)

2.175

0.250

(6.350)

0.071 (1.80)

0.157 (4.00)

Units : Inches (Millimeters)

0.100

0.1496 (3.80)

(2.50 )

2.886

(73.30)

0.039 ± 0.002

(1.000 ± 0.050)

0.0078 ±0.006

(0.20 ±0.15)

0.050

(1.270)

0.0787 (2.00)

0.1575 (4.00)

0.118 (3.00)

5.250 (133.35)

Figure 1: KVR333X64C25K2/1G 184-Pin DI MM

Document No. VALUERAM0302-001.A00

07/15/03