Kingston KVR266X64C21G User Manual

Memory Module Specification

KVR266X64C2/1G

1GB 128 x 64-Bit DDR266

CL2 184-Pin DIMM

DESCRIPTION:

This document describes ValueRAM's 128M x 64-bit 1GB (1024MB) DDR266 CL2 SDRAM (Synchronous DRAM) memory module. The components on this module include sixteen 64M x 8-bit (16M x 8-bit x 4 Bank ) DDR266 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.5V. The electrical and mechanical specifications are as follows:

FEATURES:
		Clock Cycle Time (tCK)	7.5ns (min.) / 12ns (max.)
		Row Cycle Time (tRC)	65ns (min.)
		Refresh Row Cycle Time (tRFC)	75ns (min.)
		Row Active Time (tRAS)	45ns (min.) / 120,000ns (max.)
		Single Power Supply of	+2.5V (+/- .2V)
		Power (IDD0)	3.200 W (operating)
		UL Rating	94 V - 0

Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.250" (31.75mm).

1.250”
(31.75)
(17.80)
0.700”
0.393”
(10.00)
0.000”	1
(00.00)	(00.00)
0.000”
		0.250	0.157
	0.26	(6.350)
			(4.00)
	(6.62)
			0.1496
			(3.80)
	2.175		0.071
			(1.80)

Units : Inches (Millimeters)

													2.886” (73.30)
0.100			)		0.039 ± 0.002
			(2.50
											(1.000 ± 0.050)
											0.0078 ±0.006
													(0.20 ±0.15)
													0.050
							(1.270)

5.250” (133.35)

0.118

(3.00)

0.0787

(2.00)

0.1575

(4.00)

Figure 1: KVR266X64C2/1G 184-Pin DIMM

Document No. VALUERAM0316-001.B00

09/22/04