Memory Module Specification
KVR133X64SC3/512
PC133 SDRAM 144-Pin CL3
SODIMM Memory Module
DESCRIPTION:
This document describes ValueRAM's CL3 64M x 64-bit (512MB) SDRAM (Synchronous
DRAM) PC133 Small Outline DIMM memory module. The components on this module include
sixteen 32M x 8-bit (8M x 8-bit x 4 Bank / PC133 components) 8K Refresh SDRAM in CSP
packages. This 144-pin SODIMM uses gold contact fingers and requires +3.3V. The electrical
and mechanical specifications are as follows:
FEATURES:
CLK Cycle Time (tCC) min. = 7.5ns (CAS Latency = 3) / max. = 1000ns
Row Cycle Time (tRC) 65ns
CLK to Output (tSAC) max. = 5.4ns (CAS Latency = 3)
Single Power Supply of +3.3V (+/- .3V)
Power 2.921 W (operating)
UL Rating 94 V - 0
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
32M x 8-Bit
32M x 8-Bit
32M x 8-Bit
32M x 8-Bit
32M x 8-Bit
32M x 8-Bit
32M x 8-Bit
CSP
CSP
CSP
CSP
CSP
CSP
CSP
32M x 8-Bit
CSP
R .078
1.250
32M x 8-Bit
32M x 8-Bit
32M x 8-Bit
32M x 8-Bit
32M x 8-Bit
32M x 8-Bit
32M x 8-Bit
0.787
CSP
CSP
CSP
CSP
CSP
ASSY USA
CSP
CSP
32M x 8-Bit
CSP
0.000
0.000
Figure 1: KVR133X64SC3/512 144-Pin SDRAM Module
Document No. VALUERAM0232-001.A00
1.141
2.660
03/07/02