Memory Module Specification
KVR133X64C3SS/128
128MB 16M x 64-Bit PC133
168-Pin Single-Sided DIMM
DESCRIPTION:
This document describes ValueRAM's 16M x 64-bit (128MB) PC133 CL3 SDRAM (Synchronous DRAM) single-sided memory module. The components on this module include
four 16M x 16-bit (4M x 16-bit x 4 Bank) PC133 SDRAM in TSOP packages. This 168-pin
DIMM uses gold contact fingers and requires +3.3V. The electrical and mechanical
specifications are as follows:
FEATURES:
CLK Cycle Time (tCC) min. = 7.5ns (CAS Latency = 3) / max. = 1000ns
Row Cycle Time (tRC) 65ns
CLK to Output (tSAC) max. = 5.4ns (CAS Latency = 3)
Single Power Supply of +3.3V (+/- .3V)
Power 1.320 W (operating)
UL Rating 94 V - 0
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.375" (34.92mm).
Units : Inches (Millimeters)
5.250
0.375
(9.525)
0.096
(2.44)
1.375
(34.92)
.118DIA ± 0.004
(3.000DIA ± 0.100)
0.118
(3.000)
0.118
0.350
(8.890)
(133.350)
5.014
(127.350)
(3.000)
A
.450
(11.430)
0.250
(6.350)
1.450
(36.830)
B C
0.250
(6.350)
2.150
(54.61)
4.550
(115.57)
0.089
(2.26)
R 0.050+0.04
(R 1.27+0.1)
R 0.079
(R 2.000)
0.157 ± 0.004
(4.000 ± 0.100 )
0.700
0.100 Min
(2.540 Min)
(17.780)
0.100 Max
(2.54 Max)
Figure 1: KVR133X64C3SS/128 168-Pin SDRAM Module
Part No. VALUERAM212-001.B00
0.200 Min
(5.08 Min)
0.050 ± 0.0039
(1.270 ± 0.10)
04/25/04