Kingston KVR133X64C3L512 User Manual
Memory Module Specification
KVR133X64C3L/512
512MB 64M x 64-Bit PC133
DESCRIPTION:
This document describes ValueRAM's 64M x 64-bit (512MB) CL3 SDRAM (Synchronous
DRAM) 133MHz low profile memory module. The components on this module include
sixteen 32M x 8-bit (8M x 8-bit x 4 Bank) PC133 CL3 SDRAM in TSOP packages. This 168pin DIMM uses gold contact fingers and requires +3.3V. The electrical and mechanical
specifications are as follows:
FEATURES:
CLK Cycle Time (tCC) min. = 7.5ns (CAS Latency = 3) / max. = 1000ns
Row Cycle Time (tRC) 65ns
CLK to Output (tSAC) max. = 5.4ns (CAS Latency = 3)
Single Power Supply of +3.3V (+/- .3V)
Power 4.125 W (operating)
UL Rating 94 V - 0
CL3 Low Profile 168-Pin DIMM
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.2" (30.48mm).
5.250
0.118
(3.000)
1.150
(29.210)
0.118
(3.000)
.118DIA ± 0.004
(3.000DIA ± 0.100)
0.350
(8.890)
Tolerances : ± 0.005(.13) unless otherwise specified
0.250
(6.350)
0.079 ± 0.004
(2.000 ± 0.100)
Detail A
A
.450
(11.430)
0.123 ± 0.005
(3.125 ± 0.125)
0.250
(6.350)
(36.830)
1.450
(133.350)
5.014
(127.350)
4.550
(115.57)
0.250
(6.350)
Detail B
B C
0.250
(6.350)
0.123 ± 0.005
(3.125 ± 0.125)
0.079 ± 0.004
(2.000 ± 0.100)
2.150
(54.61)
0.089
(2.26)
0.100 Min
(2.540 Min)
Units : Inches (Millimeters)
0.100 Min
(2.540 Min)
Detail C
R 0.079
(R 2.000)
0.157 ± 0.004
(4.000 ± 0.100)
0.700
(17.780)
0.200 Min
(5.08 Min)
0.039 ± 0.002
(1.000 ± 0.050)
0.008 ± 0.006
(0.200 ± 0.150)
0.050
(1.270)
0.150 Max
(3.81 Max)
0.050 ± 0.0039
(1.270 ± 0.10)
Figure 1: KVR133X64C3L/512 168-Pin SDRAM Module
Part No. VALUERAM0251-001.A00
06/18/02
Loading...