Kingston KVR133X64C2512 User Manual

Memory Module Specification

KVR133X64C2/512

512MB 64M x 64-Bit PC133 CL2 168-Pin DIMM Module

DESCRIPTION:

This document describes ValueRAM's 64M x 64-bit (512MB) CL2 SDRAM (Synchronous DRAM) PC133 DIMM module. The components on this module include sixteen 32M x 8-bit (8M x 8-bit x 4 Bank) PC133 SDRAM in TSOP packages. This 168-pin DIMM uses gold contact fingers and requires +3.3V. The electrical and mechanical specifications are as follows:

FEATURES:

CLK Cycle Time (tCC) min. = 7.5ns (CAS Latency = 2) / max. = 1000ns Row Cycle Time (tRC) 60ns CLK to Output (tSAC) max. = 5.4ns (CAS Latency = 2) Single Power Supply of +3.3V (+/- .3V) Power 4.140 W (operating) UL Rating 94 V - 0

Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.375" (34.92mm).

Units : Inches (millimeters)

5.250

0.387 ± 0.062 (9.84 ± 1.59)

.118DIA ±.004

(3.000DIA ± .100)

1.375

(3.000)

0.175 (4.45)

(34.925)

(8.890)

0.118

0.350

(3.000)

.450 (11.430)

0.250

(6.350)

(36.830)

1.450

(133.350)

5.014

(127.350)

B C

0.250

(6.350)

2.150

(54.61)

4.550

(115.57)

0.089 (2.26)

R 0.079

(R 2.000)

0.157 ± 0.004

(4.000 ± 0.100 )

0.100Min (2.540Min)

0.700 (17.780)

0.150 Max

(3.81 Max)

Figure 1: KVR133X64C2/512 168-Pin SDRAM Module

Document No. VALUERAM0209-001.B00

0.200 Min

(5.08 Min)

0.050 ± 0.0039 (1.270 ± 0.10)

05/09/02