Kingston KVR133X64C2256 User Manual

Memory Module Specification
KVR133X64C2/256
256MB 32M x 64-Bit PC133
CL2 168-Pin DIMM Module
DESCRIPTION:
This document describes ValueRAM's 32M x 64-bit (256MB) CL2 SDRAM (Synchronous DRAM) PC133 DIMM module. The components on this module include eight 32M x 8-bit (8M x 8-bit x 4 Bank) PC133 SDRAM in TSOP packages. This 168-pin DIMM uses gold contact fingers and requires +3.3V. The electrical and mechanical specifications are as follows:
FEATURES:
Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.375" (34.92mm).
5.250
1.150 (29.210)
.118DIA ± 0.004
(3.000DIA ± 0.100)
0.250
(6.350)
Detail A
0.118
(3.000)
0.118 (3.000)
0.350
(8.890)
0.079 ± 0.004
(2.000 ± 0.100)
A
.450 (11.430)
0.123 ± 0.005
(3.125 ± 0.125)
(133.350)
5.014
(127.350)
0.250
(6.350)
1.450
(36.830)
4.550
(115.57)
Units : Inches (Millimeters)
0.250
(6.350)
Detail B
B C
0.250
(6.350)
(3.125 ± 0.125)
0.079 ± 0.004
(2.000 ± 0.100)
2.150
(54.61)
0.123 ± 0.005
0.089 (2.26)
0.100 Min
0.100 Min
(2.540 Min)
Detail C
R 0.079
(R 2.000)
0.157 ± 0.004
(4.000 ± 0.100)
0.700 (17.780)
(2.540 Min)
0.039 ± 0.002
(1.000 ± 0.050)
0.008 ± 0.006
0.050
(1.270)
(0.200 ± 0.150)
Figure 1: KVR133X64C2/256 168-Pin SDRAM Module
Document No. VALUERAM0208-001.C00
03/11/03
Loading...