Kingston KVR100X64SC2L256 User Manual

Memory Module Specification

KVR100X64SC2L/256

256MB Low Profile PC100 144-Pin

CL2 SODIMM Memory Module

DESCRIPTION:

This document describes ValueRAM's CL2 32M x 64-bit (256MB) SDRAM (Synchronous DRAM) PC100 Small Outline DIMM memory module. The components on this module include sixteen 16M x 8-bit (4M x 8-bit x 4 Bank / PC100 components) 4K Refresh SDRAM in UBGA packages. This 144-pin SODIMM uses gold contact fingers and requires +3.3V. The electrical and mechanical specifications are as follows:

FEATURES:

	CLK Cycle Time (tCC)	min.= 10ns (CAS Latency = 2) / max. = 1000ns
	RowCycleTime(tRC)	70ns
	CLK to Output (tSAC)	max. = 6ns (CAS Latency = 2)
	SinglePowerSupplyof	+3.3V (+/- .3V)
	Power	3.696 W (operating)
	ULRating	94 V - 0

Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.200" (30.48mm).

				2.66	Units : Inches (Millimeters)
				(67.56)
				2.50
				(63.60)				2-R 0.078 Min
0.16 ± 0.039								(2.00 Min)
(4.00 ± 0.10)							1.00	(25.40)
0.24	(6.0)	1	59	61	0.79	(20.00)
					143
	0.13		0.91		1.29	2-f 0.07
(3.30)			(23.20)	0.18	(32.80)	(1.80)
				(4.60)
				0.083	Tolerances : ±.006(.15) unless otherwise specified
			0.10	(2.10)
			(2.50)	Z	Y
0.15
(3.70)
		2	60	62	144

		0.150 Max
		(3.80 Max)
0.125 Min	(3.20 Min)	0.157 Min (4.00 Min)
		0.04 ± 0.0039
		(1.00 ± 0.10)

0.10 Min	(2.55 Min)
0.16 ± 0.0039
(4.00 ± 0.10)
0.06 ± 0.0039
(1.50 ± 0.1)

Detail Z

0.024 ± 0.001

(0.60 ± 0.05)

0.01 Max

(0.25 Max)

0.03 TYP

(0.80 TYP)

Detail Y

Figure 1: KVR100X64SC2L/256 144-Pin SDRAM Module

Document No. VALUERAM0205-001.B00

04/28/02