Kingston KVR100X64SC2256 User Manual

Memory Module Specification
KVR100X64SC2/256
100MHz SDRAM 144-Pin
SODIMM Memory Module
DESCRIPTION:
This document describes ValueRAM's CL2 32M x 64-bit (256MB) SDRAM (Synchronous DRAM) PC100 Small Outline DIMM memory module. The components on this module include sixteen 16M x 8-bit (4M x 8-bit x 4 Bank / PC100 components) 4K Refresh SDRAM in Shrink TSOP (sTSOP) packages. This 144-pin SODIMM uses gold contact fingers and requires +3.3V. The electrical and mechanical specifications are as follows:
FEATURES:
CLK Cycle Time (tCC) min. = 10ns (CAS Latency = 2 / max. = 1000ns Row Cycle Time (tRC) 70ns CLK to Output (tSAC) max. = 6ns (CAS Latency = 2) Single Power Supply of +3.3V (+/- .3V) Power 3.696 W (operating) UL Rating 94 V - 0
Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.250" (31.75mm).
R .030
1.250
STSOP 16M x 8
STSOP 16M x 8
Note: All measurements are in decimal inches.
16M x 8 STSOP
16M x 8 STSOP
STSOP 16M x 8
STSOP 16M x 8
R .078
16M x 8 STSOP
STSOP 16M x 8
STSOP 16M x 8
16M x 8 STSOP
STSOP 16M x 8
STSOP 16M x 8
0.787
16M x 8 STSOP
16M x 8 STSOP
16M x 8 STSOP
ASSY USA
16M x 8 STSOP
0.000
0.000
Figure 1: KVR100X64SC2/256 256MB 144-Pin SDRAM Module
Document No. VALUERAM0052-001.A00
1.141
2.660
02/28/02
Loading...