Kingston KVR100X64C2128 User Manual

TECHNOLOGY
Memory Module Specification
KVR100X64C2/128
100MHz SDRAM 168-Pin
PC100 DIMM Memory Module
DESCRIPTION:
This document describes ValueRAM's 16M x 64-bit (128MB), CAS Latency 2 (CL2) SDRAM (Synchronous DRAM) 100MHz memory module. The components on this module include sixteen 8M x 8-bit (2M x 8-bit x 4 Bank / PC100 components) SDRAM in TSOP packages. This 168-pin DIMM uses gold contact fingers and requires +3.3V. The electrical and mechanical specifications are as follows:
CLK Cycle Time (tCC) min. = 10ns (CAS Latency = 2) / max. = 1000ns Row Cycle Time (tRC) 70ns CLK to Output (tSAC) max. = 6ns (CAS Latency = 2) Single Power Supply of +3.3V (+/- .3V) Power 4.092 W (operating) UL Rating 94 V - 0
Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.375" (34.92mm).
Units : Inches (millimeters)
5.250
0.387 ± 0.062 (9.84 ± 1.59)
.118DIA ±.004
(3.000DIA ± .100)
1.375
0.175 (4.45)
(34.925)
0.118
(3.000)
0.118
0.350
(8.890)
(3.000)
A
.450 (11.430)
0.250
(6.350)
(36.830)
1.450
(133.350)
5.014
(127.350)
4.550
(115.57)
B C
0.250
(6.350)
2.150
(54.61)
0.089 (2.26)
R 0.079
(R 2.000)
0.157 ± 0.004
(4.000 ± 0.100 )
0.100Min (2.540Min)
0.200 Min
0.700 (17.780)
0.150 Max
(3.81 Max)
(5.08 Min)
Figure 1: KVR100X64C2/128 168-Pin SDRAM Module
Document No. VALUERAM0059-001.C00
0.050 ± 0.0039 (1.270 ± 0.10)
02/27/02
Loading...