Kingston KSM24ED8-16ME User Manual

Memory Module Specifi cations
KSM24ED8/16ME
16GB 2Rx8 2G x 72-Bit PC4-2400 CL17 288-Pin DIMM
DESCRIPTION
FEATURES
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
SPECIFICATIONS
CL(IDD) Row Cycle Time (tRCmin) Refresh to Active/Refresh
Command Time (tRFCmin) Row Active Time (tRASmin) Maximum Operating Power UL Rating Operating Temperature Storage Temperature
*Power will vary depending on the SDRAM used.
17 cycles
46.16ns(min.) 350ns(min.)
32ns(min.) TBD W* 94 V - 0
o
C to +85o C
0
o
C to +100o C
-55
• On-die VREFDQ generation and calibration
• Dual-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• Temperature sensor with integrated SPD
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
kingston.com
Continued >>
Document No. 4808551A 02/09/18 Page 1
MODULE DIMENSIONS
±
3.00
All measurements are in millimeters.
(Tolerances on all dimensions are ±0.12 unless otherwise specified)
133.35
129.55
2.10
±±0.15
31.25
Detail A
Pin 1
0.15
3.35
2.70
28.90
The product images shown are for illustration purposes only and may not be an exact representation of the product. Kingston reserves the right to change any information at anytime without notice.
Detail B Detail D Detail C
Pin 35 Pin 47
64.60
Detail E
Pin 105 Pin 117
56.10
22.95
11.00
8.00
17.60
14.60
kingston.com
©2018 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved. All trademarks and registered trademarks are the property of their respective owners.
Document No. 4808551A Page 2
Loading...