Kingston KHX3200K22G User Manual
Memory Module Specification
KHX3200K2/2G
2GB (1GB 128M x 64-Bit x 2 pcs.)
PC3200 CL2.5 184-Pin DIMM Kit
DESCRIPTION:
Kingston's KHX3200K2/2G is a kit of two 128M x 64-bit 1GB (1024MB) DDR400 CL2.5 SDRAM
(Synchronous DRAM) memory modules. Total kit capacity is 2GB (2048MB). The components on
each module include sixteen 64M x 8-bit (16M x 8-bit x 4 Bank / 200MHz, 5ns) DDR400 SDRAM
in TSOP packages. Each 184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical
and mechanical specifications are as follows:
FEATURES:
Power supply : Vdd: 2.6V ± 0.1V, Vddq: 2.6V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 2.5, 3 (clock)
Programmable Burst length (2, 4, 8)
Programmable Burst type (sequential & interleave)
Timing Reference: 2.5-3-3-7-1 at +2.6V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval(8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.250” (34.75mm), double sided component
PERFORMANCE:
Clock Cycle Time (tCK) 5ns (min.) / 10ns (max.)
Row Cycle Time (tRC) 55ns (min.)
Refresh Row Cycle Time (tRFC) 70ns (min.)
Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.)
Power (IDD0) 5.408 W (operating per module)
UL Rating 94 V - 0
Operating Temperature 0o C to 70o C
Storage Temperature -55o C to +150o C
KEYED
Document No. 4803853-001.B00
01/28/04
Page 1
MODULE DIMENSIONS:
Kingston Technology
1.250"
1.200
(34.75)
(30.48)
(17.80)
0.700
0.393
(10.00)
0.000
(00.00)
1
0.000
(00.00)
0.26
(6.62)
2.175
0.250
(6.350)
0.071
(1.80)
Units : Inches (Millimeters)
0.157
(4.00)
0.1496
(3.80)
2.886
(73.30)
0.039 ± 0.002
0.100
(2.50 )
(1.000 ± 0.050)
0.0078 ±0.006
(0.20 ±0.15)
0.050
(1.270)
0.0787
(2.00)
0.1575
(4.00)
5.250
0.118
(3.00)
(133.35)
For more information, go to www.kingston.com
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
Document No. 4803853-001.B00 Page 2
Loading...