TECHNOLOGY
Memory Module Specification
KHX3200A/512
512MB 64M x 64-Bit PC3200
CL2 184-Pin DIMM
DESCRIPTION:
This document describes Kingston's 64M x 64-bit (512MB) DDR400 SDRAM (Synchronous DRAM)
CL2 memory module. The components on this module include sixteen 32M x 8-bit (8M x 8-bit x 4
Bank / 200MHz, 5ns) DDR400 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact
fingers and requires +2.6V. The electrical and mechanical specifications are as follows:
FEATURES:
Power supply : Vdd: 2.6V ± 0.2V, Vddq: 2.6V ± 0.2V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 2 (clock)
Programmable Burst length (2, 4, 8)
Programmable Burst type (sequential & interleave)
Timing Reference: 2-3-2-6-1 at +2.6V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval(8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.250” (34.75mm), double sided component
PERFORMANCE:
Clock Cycle Time (tCK) 5ns (min.) / 10ns (max.)
Row Cycle Time (tRC) 55ns (min.)
Refresh Row Cycle Time (tRFC) 65ns (min.)
Row Active Time (tRAS) 40ns (min.) / 100,000ns (max.)
Power (IDD0) 3.744 W (operating)
UL Rating 94 V - 0
Operating Temperature 0o C to 70o C
Storage Temperature -55o C to +150o C
KEYED
Document No. 4803618-001.B00
06/14/06
Page 1
MODULE DIMENSIONS:
Kingston Technology
1.250"
1.200
(34.75)
(30.48)
(17.80)
0.700
0.393
(10.00)
0.000
(00.00)
1
0.000
(00.00)
0.26
(6.62)
2.175
0.250
(6.350)
0.071
(1.80)
Units : Inches (Millimeters)
0.157
(4.00)
0.1496
(3.80)
2.886
(73.30)
0.039 ± 0.002
0.100
(2.50 )
(1.000 ± 0.050)
0.0078 ±0.006
(0.20 ±0.15)
0.050
(1.270)
0.0787
(2.00)
0.1575
(4.00)
5.250
0.118
(3.00)
(133.35)
For more information, go to www.kingston.com
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
Document No. 4803618-001.B00 Page 2