Kingston KHX32001G User Manual

Memory Module Specification

KHX3200/1G

1GB 128M x 64-Bit PC3200

CL2.5 184-Pin DIMM

DESCRIPTION:

This document describes Kingston's 128M x 64-bit 1GB (1024MB) DDR400 CL2.5 SDRAM (Synchronous DRAM) memory module.The components on this module include sixteen 64M x 8-bit (16M x 8-bit x 4 Bank / 200MHz, 5ns) DDR400 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical and mechanical specifications are as follows:

FEATURES:

Power supply : Vdd: 2.6V ± 0.1V, Vddq: 2.6V ± 0.1V Double-data-rate architecture; two data transfers per clock cycle Bidirectional data strobe(DQS) Differential clock inputs(CK and CK) DLL aligns DQ and DQS transition with CK transition Programmable Read latency 2.5, 3 (clock) Programmable Burst length (2, 4, 8) Programmable Burst type (sequential & interleave) Timing Reference: 2.5-3-3-7-1 at +2.6V Edge aligned data output, center aligned data input Auto & Self refresh, 7.8us refresh interval(8K/64ms refresh) Serial presence detect with EEPROM High Performance Heat Spreader

PCB : Height 1.250” (34.75mm), double sided component

PERFORMANCE:

Clock Cycle Time (tCK) 5ns (min.) / 10ns (max.) Row Cycle Time (tRC) 55ns (min.) Refresh Row Cycle Time (tRFC) 70ns (min.) Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.) Power (IDD0) 5.408 W (operating per module) UL Rating 94 V - 0 Operating Temperature 0o C to 70o C

Storage Temperature -55o C to +150o C

KEYED

Document No. 4803852-001.B00

01/28/04

Page 1

MODULE DIMENSIONS:

Kingston Technology

1.250"

1.200

(34.75)

(30.48)

(17.80)

0.700

0.393

(10.00)

0.000

(00.00)

0.000

(00.00)

0.26

(6.62)

2.175

0.250

(6.350)

0.071 (1.80)

Units : Inches (Millimeters)

0.157 (4.00)

0.1496 (3.80)

2.886

(73.30)

0.039 ± 0.002

0.100

(2.50 )

(1.000 ± 0.050)

0.0078 ±0.006

(0.20 ±0.15)

0.050

(1.270)

0.0787 (2.00)

0.1575 (4.00)

5.250

0.118 (3.00)

(133.35)

For more information, go to www.kingston.com

All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.

Document No. 4803852-001.B00 Page 2