Kingston EMMC04G-M627, EMMC04G-M657, EMMC08G-MB29, in, EMMC16G-TB29 Datasheet

...

KINGSTON.COM/EMMC

e•MMC —

the perfect storage solution for mobile and embedded applications.

Overview

Kingston® e•MMC™ Flash memory follows the JEDEC e•MMC 5.1 standard and encloses the NAND Flash and e•MMC controller inside one JEDEC standard package to provide a standard interface to the host CPU. The e•MMC controller directs the Flash management, including ECC, wear-leveling, lOPS optimization and read sensing, signicantly reducing the storage management burden on the host CPU. A universal storage solution, Kingston e•MMC is ideal for many electronic devices, including: smartphones, tablet PCs, eBook readers, electronic learning products, smart TVs, set-top boxes, smart home appliances and many wearable devices. Beyond its use in consumer products, e•MMC is being rapidly adopted in many other embedded applications, such as Single Board Computers (SBC), robotics, medical devices, networking and building control devices because of its compact size, low-power consumption and numerous enhanced features. With the rapid growth of the IoT market, e•MMC is nding its way to newer applications.

Key Benets

• Simplies system design and reduces time to market. The standard interface makes fast-changing NAND technology invisible to the host and the host processor doesn’t have to keep changing its software to accommodate every NAND technology change and variation. This helps to signicantly reduce the design-in complexity and shorten the qualication cycle.

• Helps to improve whole system performance. The e•MMC controller frees up the host processor’s valuable resources from NAND management so the host processor can use its processing power on other tasks.

• Provides a cost-eective solution. As opposed to SLC NAND, e•MMC uses MLC NAND so it makes higher capacity storage in embedded applications much more aordable and enables today’s embedded designs to meet increasing demands for storage.

e•MMC Part Numbers and Specications Key Features

Part Number Capacity

EMMC04G-M627 4GB 5.0/5.1 (HS400) 11.5x13x1.0 MLC

EMMC04G-M657 4GB 5.0/5.1 (HS400) 9.0x7. 5x 0. 8 MLC

EMMC08G-MB29 8GB 5.1 (HS400) 11. 5x13x0.8

EMMC16G-TB29 16GB 5.1 (HS400) 11. 5x13x0.8 3D TLC

EMMC32G-TB29 32GB 5.1 (HS400) 11. 5x13x0.8 3D TLC

EMMC32G-TA29 32GB 5.1 (HS400) 11. 5x13x 0 . 8 3D TLC

EMMC64G-TA29 64GB 5.1 (HS400) 11.5x13 x0 .8 3D TLC

EMMC128-TA29 128 GB 5.1 (HS400) 11.5x13x1.0 3D TLC

e•MMC

Standard

Package NAND

3D TLC

in pMLC

For more information, please visit kingston.com/emmc

THIS DOCUME NT SUBJECT TO CHANGE WI THOUT NOTICE.

©2020 Kingston Technol ogy Corporatio n, 17600 Newhop e Street, Fountain Valley, CA 92708 USA . All rights res erved. All tra demarks and reg istered tradema rks are the prope rty of their res pective owne rs. Printe d in the USA MK F-625.4US

JEDEC Standard Features e•MMC 5.0 e•MMC 5.1

Boot Operation

Partitioning

Sleep Mode

Replay Protec ted Memory Block

Secure Trim/Secure Erase

Hardware Reset

Reliable Write

Background Operation

High Priority Interrupt

DDR Interf ace

Discard/Sanitize CMD

Packed Commands, Context IDs

Power OFF Notic ation

Data Tag

Device Health Report

Field FW Update

Production State Awareness

CMD Queuing

√ √

√