Kingston D1216ECMDXGJDI, D2568ECMDPGJDI, D2516ECMDXGJDI, D5128ECMDPGJDI User guide
Kingston I-Temp DDR3/3L DRAM
for embedded applications
Overview
Ideal for embedded applications, Kingston’s I-Temp DRAM meets industrial operating temperature
requirements (-40°C~+95°C) which makes it suitable for outdoor and harsh environments. It supports
both low (1.35V) and standard (1.5V ) voltage for design exibility.
DDR3/3L Part Numbers and Specifications
KINGSTON.COM
Kingston DDR3/3L
I-Temp 30nm
DDR3/3L PN
D1216ECMDXGJDI 2Gb
D2568ECMDPGJDI 2Gb
D2516ECMDXGJDI 4Gb
D5128ECMDPGJDI 4Gb
*Backward compatible to 1.5V VDD, VDDQ
Capacity Description
96 ball FBGA
DDR3/3L I-Temp
78 ball FBGA
DDR3/3L I-Temp
96 ball FBGA
DDR3L I-Temp
78 ball FBGA
DDR3L I-Temp
Package
Size
7.5x13.5x1.2 128Mx16
7.5x13.5x1.2 256Mx8
7.5x13.5x1.2 256Mx16
7.5x10.6x1.2 512Mx8
Conguration
(words x bits)
Speed
1866
Mbps
1866
Mbps
1866
Mbps
1866
Mbps
VDD,
VDDQ
1.35V* -40°C~+95°C
1.35V* -40°C~+95°C
Operating
Temperature
1.35V -40°C~+95°C
1.35V -40°C~+95°C
Key Features
• Double-data-rate architecture: two data transfers per clock cycle
• High-speed data transfer is realized by 8 bits prefetch pipelined architecture
• Bi-directional dierential data strobe (DOS and /DQS) is transmitted/received with data for capturing
data at the receiver
• DOS is edge-aligned with data for READS; center-aligned with data for WRITES
• Dierential clock inputs (CK and /CK)
• DLL aligns DQ and DOS transitions with CK transitions
• Commands entered on each positive CK edge; data and data mask referenced to both
edges of DQS
• Data mask (DM) for write data
• Posted /CAS by programmable additive latency for better command and data bus eciency
• On-Die Termination (ODD for better signal quality)
— Synchronous ODT
— Dynamic CDT
— Asynchronous ODT
• Multi Purpose Register (MPR) for pre-dened pattern read out
• ZQ calibration for DO drive and ODT
• Programmable Partial Array Self-Refresh (PASR)
• RESET pin for Power-up sequence and reset function
• SRT range: Normal/extended
• Programmable Output driver impedance control
THIS DOCUME NT SUBJECT TO CHANGE WI THOUT NOTICE
©2020 Kingston Technol ogy Corporatio n, 17600 Newh ope Street, Fountain Val ley, CA 92708 USA.
All rights res erved. All trad emarks and registe red trademarks a re the propert y of their respecti ve owners. MKF-623 .2US
Loading...