KINGSTON 40KI3236-2018BR Datasheet

Memory Module Specifications
KF436C18BBAK2/32
32GB (16GB 2G x 64-Bit x 2 pcs.) DDR4 3600 CL18 288 Pi DIMM Kit
SPECIFICATIONS
DESCRIPTION
FURY KF436C18BBAK2/32 is a kit of two 2G x 64-bit (16GB)
module, based on eight 2G x 8-bit FBGA components per module.
Each module kit supports Intel® Extreme Memory Profiles (Intel®
XMP) 2.0. Total kit capacity is 32GB. Each module has been tested
to run at DDR4-3600 at a low latency timing of 18-22-22 at 1.35V.
The SPDs are programmed to JEDEC standard latency DDR4-2400
timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact
fingers. The JEDEC standard electrical and mechanical
specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
17 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
94 V - 0
o
C to +70o C
0
o
C to +85o C
-40
FEATURES
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
FACTORY TIMING PARAMETERS
Default (JEDEC): DDR4-2400 CL17-17-17 @ 1.2V
XMP Profile #1: DDR4-3600 CL18-22-22 @ 1.35V
XMP Profile #2: DDR4-3000 CL16-18-18 @ 1.35V
kingston.com
• Height 1.62” (41.2mm), w/heatsink
Continued >>
Document No. 4810007A 07/06/21 Page 1
·
continued
MODULE WITH HEAT SPREADER
41.2 mm
MODULE DIMENSIONS
133.35 mm
7.2 mm
All measurements are in millimeters.
(Tolerances on all dimensions are ±0.12 unless otherwise specified)
133.35
129.55
2.10
··0.15
3.00
Detail A
Pin 1
0.15
3.35
2.70
The product images shown are for illustration purposes only and may not be an exact representation of the product. Kingston reserves the right to change any information at anytime without notice.
28.90
Detail B Detail D Detail C
Pin 35 Pin 47
64.60
Detail E
Pin 105 Pin 117
FOR MORE INFORMATION, GO TO KINGSTON.COM
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at the published FURY memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.
©2021 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved. Kingston FURY and the Kingston FURY logo are trademarks of Kingston Technology Corporation. All trademarks are the property of their respective owners.
56.10
22.95
31.25
11.00
8.00
17.60
14.60
Document No. 4810007A Page 2
kingston.com
Loading...