Kingstar K7 User Manual

Indicator Light Manual

TWS EARBUDS MANUAL

Last Song

Playing music, Double left earbud button

Next Song

Playing music, Double press right earbud button

Increase Volume

Single Paired

Playing music, Press right earbud three times

When single will be off status, long press button

3S and with pair model, and it is with Red & Bl ue

LED flash nonstop, research the Bluetooth name

I7 on the device and pair them.

Turn on voice

helps

Without calling/without incoming call, press any

earbuds 4 times

Canceling Pairing

information

Long press single earbuds when it is on the off

status until quickly flash red led

Two earbuds pairing

After Canceling Pairing information, long presstwo

earbuds together and research bluetooth name

K7 and pairing them.

Status

Actions

Power On

Blue Led

Power Off

Red Led

True Wireless Pairing

Red & Blue LED flash nonstop

Paired

Blue LED flash

Charging

Red Led

Charging complete

Blue Led

Audio Playing

Blue Led

10% Low Battery

Red Led

Model Number

K7

Bluetooth Version

V5.0

Bluetooth Profile Supporte

A2DPV1.3, AVRCPV1.6, HFPV1.6,

HSPV1.2

Working Range

15m

Charge box capacity

500mAh

Earbuds capacity

50mAh

Talking time

4.5h

Music time

4.5h

Standby time

120h

Charge time

40h

Input

5V

Support Phone system

Support iOS, Android

Support Function

Handfree call

Turn On

Long Press & Hold for 1.5 seconds, Blue

led Remain 1S, and it will be voice reminding

Turn Off

Long Press & Hold for 3 seconds, Red led

Remain 2S,and it will be voice reminding

Answer

Incoming call, Click any earbud one time

Refuse

Calling, Press any earbud one time

Refuse Incoming

Incoming call, Long press earbuds button

Music Playing/Pause

Without calling/without incoming call, press

left or right earbuds one time

Return Dialing the

end of phone number

Without calling/without incoming call

OPERATION INSTRUCTIONS

This device complies
with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to
operate the equipment.

•