Kingstar HXGT2 V2 User Manual
Digital propotional radio control system
http://www.inhobby.com
HX-GT2
GT2
INSTRUCTION MANUAL
用户手册
This product is not suitable
for children under 15
years.
Menu
http://www.inhobby.com
1.Introduction………………………2
2.Services……………………………2
3.The special symbols………………3
4.Safty guides……………………….3
5.2.4GHz system………....4
6.Battery charging notes……………5
7.Transmitter parameters…………….6
8.Receiver parameters………………..6
9.Receiver connectivity………………7
10.2.4G Operation notes………………9
11.Each part of the transmitter…………11
12.Transmitter function notes………….12
13.Failsafe function……………13
14.simulate………………………………15
15.Exploded Drwing…………………….16
16.Packaging with content list…………...17
Thank you for chooslng 2.4G ratio remote control digital products,If you are the first time
http://www.inhobby.com
to use this type of products,please read this statement carefully and strictly in accordance
with the requirements of operation. You could refer
during the operation.Please well keep the manual after use because you might have to
use it again next time. Once again,thanks for buying our products.
非常感谢您选择使用 2.4G数码比率遥控产品，如果你是第一次使用该类
型产品，请您在使用之前先仔细阅读此说明书，并严格按说明要求进行操作。在操
作过程中您如果遇到问题同样可以查看说明书。说明书在使用完后请您妥善保管好，
以备后用。再次感谢您使用 的产品，并希望它能给您带来快乐。
to the manual if you meet any problems
2.servlces
If you find any problems during the operation process, please refer to the manual. If the
problem still exist, you could our dealers to find out the way to solve. And you could
also log on to our website service center:
如果您在使用过程中发现有问题,请您第一时间先查看数控明书.如果问题还不能
解决,您可以跟我们的经销商联系解决.您也可以登陆我们的服务中心网站:
3.THe special symbols
http://www.inhobby.com
Please pay attention to the following symbols when it appears on the manual, and read
Carefully.
此说明书中有如下符号的地方请您特别注意，并仔细阅读。
If the operator does not operate by following the instructions, the operator
Danger:
Warning:
Attention:
May lead to serious injuries, even mortal danger.
如果操作者不按正常操作方法操作，可能导致操作者严重受伤，甚至致命危险！
If the oerator does not operate by following the instructions, the operator
may lead to serious injuries, even mortal danger.
如果操作者不按正常操作方法操作，可能导致操作者严重外伤，重伤或者致命情况！
If the operator does not operate by following the instructions, the operator
may lead to minor injuries, but generally it will not cause serious injuries
to the operator.
如果操作者不按正常操作方法操作，可能会导致操作者轻伤，但一般不会对操作者造
成重伤！
Prohibition
禁止
Mandatory
强制
4.saFTy GuIoes
Don't fly in night, bad weather such as rainy or thundering days. It will interfere the
Transmitter signal. Thereby it will create out of control and unexpected accident.
请您不要在夜晚，刮风或下雨时使用，因为这样的天气环境会对遥控设备产生干扰，从而导致失
控而产生意外！
Before you fly, please make sure the movement of server correspond with the
direction of joysticks, If inconsistent, please adjust before fly.
在飞行前,请您务必先检查伺服器的各项动作是否与对应操纵杆的方向一致,如果不一致，请调整
后再使用.
You need to turn the throttle channel(ch2)and inching switch to the lowest before
You use. Then switch on the transmitter power, finally connect the receiver.
开机使用时请您勿必先将油门通道（CH2）及微调置最低端.然后打开发射机电源并检查电源
电量,再接通接收机电源.
The sequence to shutdown is that turn off the receiver power first, and then the
transmitter power.
If
the above operations are reverse, it might lead to uncontrolled and cause
Accident.
停止使用前请您先关闭接收机电源然后关闭发射机电源。
以上操作如果反向，可能导致失控，从而产生意外！
5.2.4GHZ
http://www.inhobby.com
AFHDS(自动跳频数字系统)，这个系统是专为模型爱好者自主
研发，并具有自主知识产权的一套数字无线系统。它是专门针对模型产品而
研发的，它具有超强的主动和被动抗干扰能力及极低的使用功耗和极高的接
收灵敏度，是目前市面上最好的系统之一。此系统经过研发人员极端严格的
测试及多年市场验证，模型爱好者完全可放心使用！
AFHDS (outomatic frequency hopping digital system), is developed by for all the Radio Control model
Lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models,
That offers super active and passive anti-iamming capabilities,
sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is
now considered to be the one of the best systems available in the market.
very low power consumption and high receiver
参数说明：
频率范围：2.40-2.4835GHz; RF range:2.40-2.4835GHz;
Specifications:
波段宽度：500Hz; Bandwidth:500Hz;
波段个数：160个;
Band sum:160;
发射功率：不高于200DBm RF power: less than 20DBm;
2.4G模式：自动跳频数字系统; 2. 4 G system: AFHDS;
编码方式：GFSK; Code type: GFSK;
天线长度：26毫米; ANT length: 2 6mm;
接收灵敏度：—105DBm; RX Sensitivity:—105DBm;
系统特征：
多频点跳频工作：
此系统工作波段为2.4GHz到2.4835GHz，分160个频点，每个系统使用其中不同的16个频点工作及160种跳频规率，
从而通过开机时间不同及跳频规率不同和使用频点不同，尽最大可能使使用者的之间不会同频，从而主动避开同
频的干扰。
The system works in between 2.400GHz to 2.4835GHz frequencies that have been divided into 160 frequency points. Each system usos 16
frequencies paints and 160 hopping frequency. By using various switching-on
system can passively avoid frequency jamming.
全角度增益天线；
此系统采用的是线性优良的全波段的增益天线，天线带宽覆盖整个波段宽度，可大大提升系统发射效率及接收的
灵敏茺。从而提升系统的稳定性，并加强了自身被动抗干扰能力。
The system uses a linear spread of fine paragraph by excess antenna, which covers the entire band width of the antenna bandwidth range,
greatly enhances the efficiency of the system launch and receiving sensitivity. lt greatly improves system stability, and strengthen the passive
anti-jamming capability of the system.
独立身份识别系统：
此系统每个发射机都具有唯一的身份识别ID码，当与接收机进行对码后此ID码被存放在接收机内，当接收机工作
时首先会验证此ID码是否正确，然后才工作，否则不会工作。此项可加大系统的主动抗干扰能力，从而提升系统
的稳定性。
Each transmitter has its own unique ID. When the transmitter communicates with the receiver, the ID will be transmitter and saved in the
receiver. The System works only when the ID is matched when the receiver powers on . This dramatically increases the ability of passive antijamming and enhances the total stability of the system.
低功耗工作：
此系统完全采用超低功耗器件，且接收采用高灵敏度的接收芯片，工作时采用间隔发送方式。从而降低了发射功
率，并提升了使用工作时间。此系统使用功耗相当于以前FM版本的十分之一。
The system uses low power consumption components, and the receiver chip is exiremely sensitive; the system uses interval signal
transmission, thereby reducing the transmission power, and increasing the operating. Comparatively this system consumes only one tenth
of the normal FM system.
time, frequency hopping and different frequency points, the
4
6.BaTTery Cha()GInG notes
http://www.inhobby.com
If your transmitter, receiver using a nickel-cadmium, nickel-metal hydride rechargeable battery,
you have to well-check before you use. If lack of electricity, it could happen those phenomenon
like inadequate control or out of control, resulting accident. So please charge immediately when
the battery lacks of electricity.
如果您的发射机.接收机使用的是镍镉.镍氢等可充电电池,在使用前请您务必检查电池电量.如果电量不
足,可能导致控制距离不够或者失控的现象,从而产生意外.所以电池电量不足时请及时充电.
If you are using a nickel-cadmium, nickel-metal hydride batteries for recharging, please use our
company dedicated charger. If the electrical current is too large and it may lead to temperature
over-heated and cause fire burning accident. Please cut off the power supply immediately after
recharging. Please take out the battery from the transmitter when you are not using is within a
period, it is because the battery may damage the aircraft batteries, thus being exposed.
如果您使用的是镍镉.镍氢电池进行充电,请您使用我们公司的专用充电器.因为如果充电电流太大可能
导致电池温度太高,从而燃烧起火带来意外.充电完成请您即时切断电源。当您长时间不使用时请您
电池从发射中取出,因为电池可能导致发射机电池片损坏,从而接触不良。
6.01Transmitter charger:
A. lnstall the battery to transmitter with correct direction, and cover it.
B. Connect the charger to the commercial power connector.
C. Connect the charger to the transmitter
Connector.
D. Cut off the power supply immediately after
Recharge completed.
1．将可充电电池接方向装入发射机，并合上电池盖；
将充电器插入市电接口；
2.
将充电器充电接头插入发射机充电接口；
3.
充电完成后，即时将电源切断。
4.
6.02receiver charger;
A．Connect the charger to the commercial power connector.
B．Connect the Rechargeable receiver with battery charger
C．Recharge completed, cut off the power supply immediately.
．将充电器插入市电接口；
1
将可充电接收机用电池接口与充电器充电接口连接；
2.
3.
充电完成后，即时将电源切断.
5
Loading...