3$
!"##"$%&'
5 year frame / 5 year tank / 1 year parts and labor (limited to manufacturer defects) / 1 year
pump (limited to manufacturer defects).
The warranty will not apply to products that were improperly installed, misapplied, damaged,
altered or incompatible with fluids or components. Kings Sprayers obligation under this
warranty is limited to the repair or replacement of the product. All returns will be tested per
factory criteria. Products found not defective (under the terms of this warranty) are subject to
charges paid by the returnee for testing and packing of “tested good” non-warranty returns.
No credit or labor allowances will be given for products returned as defective. Warranty
replacement will be shipped at Kings Sprayers discretion. Kings Sprayers reserves the right to
choose the method of transportation.
Contact Kings Sprayers at 800-228-0905 to receive a Return Merchandise Authorization
(RMA#) before returning any products. The RMA number should be clearly marked on the
outside of the package. Kings Sprayers shall not be liable for freight damage incurred during
shipping. All products returned for warranty work should be sent shipping charges prepaid.
()$)#"*'+",)%&'-$,.#/"%0.$'
Roller pumps are intended for creating or booting dynamic pressure and depending on the type
of body, rotor and rollers used, will work with a variety of fluids. These pumps will work in a
variety of environments but they should never be used to pump liquids above 140°F (60°C) or
below 34°F (1°C), or when ambient air temperature is above 140°F (60°C). Any uses outside of
those specified in the pump manual are considered misuses and are prohibited. Only use
approved chemicals in your pump. Contact Kings Sprayers with any questions regarding
specific acceptable uses.
The following chemicals should never be put through any pump:
• Gasoline (Petrol)
• Kerosene/Kerosine (Paraffin)
• Diesel Fuel
• Ceramic Slurries
• Sewage
• Potable Water
• Abrasive Fluids
Roller pumps are designed to operate effectively within the specified speed, pressure and
environmental ranges. Going outside of these ranges will void the warranty and could cause
damage to property, serious injury or death.
DO NOT run the pump faster than the maximum recommended speed
DO NOT run the pump higher than the maximum recommended pressure
DO NOT run pumps when the liquid, or ambient air, has exceed the maximum or minimum
temperature limit
DO NOT pump non-approved liquids (See Below)
DO NOT pump water or other liquids for human consumption
DO NOT operate any roller pump under the influence of drugs or alcohol
DO NOT run the pump dry
DO NOT pump abrasive fluids