KingShield LEDFLP10, LEDFLP20 Installation Instructions Manual
Installation Instructions for
LED Rechargeable Work/Flood Lights
- LEDFLP10 & LEDFLP20
PLEASE ENSURE YOU READ THESE
INSTRUCTIONS BEFORE COMMENCING
ANY INSTALLATION
IMPORTANT
Both the 8W (LEDFLP10) and 16W (LEDFLP20) fittings are
portable/rechargeable SMD flood lights. The internal rechargeable
and cordless operation allows for complete portability.
• Do not look directly at the LED lights, this may cause eye injury.
• To reduce the risk of electric shock, do not submerge the units or
its accessories in any liquid. Units are water resistant (IP65) but
NOT waterproof.
• Store unit in a clean dry place.
• Protect LED lens from damage and scratching.
CHARGING THE BATTERY
Mains Charger:110V-240V AC Car Charger: 12V DC
1. Plug the DC output plug from either adapter into the DC IN
PORT of the unit and then plug the 110-240V AC or the 12V DC
adapter into the appropriate electrical socket (depending on
which charger is being used).
2. Unplug chargers after a full charge is achieved (approx 5 hours
with 110-240V mains charger).
3. Can also be operated directly from the mains charger. (When
fully discharged the battery may require 5 minutes of charging
to restart operating with 100-240V AC charger).
WORK LIGHT OPERATION
.
1. To attach it to the BASE, remove the MOUNTING BOLT and
place the light on top, aligning the hole in the mounting bracket
to the hole in the base. Replace the bolt and tighten securely.
2. Toggle switch for ON/OFF operation: (l) for ON and (O) of OFF.
3. Adjust the angle of the light by grasping the PADDED HANDLE
and tilting the face of the flood light up and down or swiveling
right to left.
ECHNICAL INFORMATION
T
ower Rating: 230V AC 50Hz
P
Wall Charger: Input: 230V AC-50/60Hz
Output: 5V DC - 500mA
ar Charger: Input: 12-24V DC
C
Output: 5V DC - 500mA
IP Rating: IP65
ed Power (LEDFLP10)
L
Consumption: 8W, 75 lm/W
Led Power (LEDFLP20)
Consumption: 16W, 75 lm/W
Battery Type:
LEDFLP10 1 x 3.7V 3600mAh Lithium
Battery (supplied)
LEDFLP20 1 x 3.7V 5400mAh Lithium
Battery (supplied)
Charging Time: 5 hours(approx)
LEDFLP10 Dims (with base): 145 x 167 x 240mm
LEDFLP20 Dims (with base): 215 x 185 x 285mm
Conforms to: EN60950-1, EN55015 &
EN61547
GUARANTEE
Your KingShield LED Rechargeable Work/ Flood Lights
are guaranteed for 3 years from the date of purchase.
This does not affect your statutory rights.
PLEASE KEEP THESE
INSTRUCTIONS SAFE FOR
FUTURE REFERENCE
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
sales@greenbrook.co.uk
w w w. gr e en b ro o k. c o. u k
Issue No: 703805
Loading...