King Refrigeration SKMCD1P-C1, SKMCD1PC1 Specifications

Name of Equipment

®

Silver King Model SKMCD1P/C1

This equipment chapter is to be inserted in the
appropriate section of the Equipment Manual.

Manufactured exclusively for

McDonald’s®
By
Silver King Refrigeration, Inc

Minneapolis, MN 55441
800-328-3329
[e-mail]

TABLE OF CONTENTS

Warranty ....................................................................................................... 2

Introduction .................................................................................................. 3

Safety............................................................................................................ 4

Operation ...................................................................................................... 4

Parts Identification / Function and Exploded View ..................................... 5

Parts Identification / Function and Exploded View ..................................... 6

Cleaning and Refilling Procedures .............................................................. 7

Cleaning and Refilling Procedures .............................................................. 8

Troubleshooting Guide ................................................................................ 9

Ordering Parts/Service ................................................................................. 9

Wiring Diagram ......................................................................................... 10

FORM 36132 REV B

© 2005 McDonald’s Corporation Printed in 03 2006 Printed in
All Rights Reserved The United States of America

Warranty

Silver King warrants to the original purchaser of Silver King refrigerated equipment that the equipment shall be free from
defects in material and workmanship under normal use and service as outlined in the Technical Manual. This limited
warranty shall apply for a period of two (2) years from the date of original purchase. The Compressor will carry an
additional three (3) year warranty. All warranties are subject to specific limitations outlined below.

This limited warranty does not apply to repair or replacement required as a result of carelessness, neglect and/or abuse,
including improper installation, incorrect voltage supply, tampering with or altering components and/or equipment or failure
to perform proper maintenance. Equipment damaged in transit, by fire, flood or an act of God is not covered. This limited
warranty does not include freight, handling, installation, labor (following the two (2) year labor warranty period) or other
incidental or consequential costs including product and/or economic loss. This limited warranty is in lieu of all other
warranties, express or implied, including those of merchantability, and is non-transferable.

Specific provisions of this limited warranty are as follows:

Two (2) Year Parts Warranty

Silver King warrants to the original purchaser of new Silver King equipment that such equipment and all parts
thereof will be free of defects in material and workmanship, under normal use and service, for a period of two (2)
years from the date of original purchase or 25 months from the date of shipment from the factory, whichever
comes first, subject to all terms and conditions herein.

This warranty is limited to repairing or replacing any parts that, at Silver King’s discretion, are deemed to be
defective within the time period covered by this warranty. The warranty does not cover freight or handling charges
incurred to replace such parts. Use of non-OEM parts may, at Silver King’s discretion, void this warranty. If
approved, warranty credit for non-OEM parts will be issued at the OEM cost.

Replacement parts sold separately are warranted for 90-days from date of purchase.

Five (5) Year Compressor Warranty

Silver King warrants to the original purchaser for a period of five (5) years from the date of original purchase or five (5) years
and one (1) month from the date of shipment from the factory, whichever comes first, that it will replace the compressor with
one of similar design and capacity, exclusive of delivery and installation charges, if it is found to Silver King’s satisfaction to
be inefficient or inoperative due to defects in material or factory workmanship. It is the owner’s responsibility to return the
serial plate of the defective compressor or at Silver King’s option the complete compressor, to the factory. Failure to do so
will void the warranty.

Two (2) Year Labor Warranty

Silver King warrants to the original purchaser for a period of two (2) years from the date of purchase or 25 months from the
date of shipment from the factory, whichever comes first, a limited service labor warranty on Silver King refrigerated
equipment subject to the following terms;

A factory issued Service Authorization Number must be obtained prior to work being performed under the labor warranty.
Call your supplier or Silver King. Claims submitted without a Service Authorization Number will be paid at Silver King’s
discretion.

The labor warranty includes standard straight time labor charges in accordance with Silver King’s Labor Warranty Guidelines
and reasonable travel time, as determined by Silver King.

The warranty does not cover original installation, startup, normal adjustments or maintenance. Normal adjustments and
maintenance include, but are not limited to; temperature control adjustments, temperature indicator calibrations, coil and filter
cleaning, condensate drain cleaning.

A second service call for a related failure is not covered.

Use of refrigerants other than specified on the equipment serial plate voids the warranty.

All claims must include; model and serial number of equipment, date of purchase, date of failure, and a copy of the service
invoice detailing the defect and service performed. No claim will be processed without this information. All claims must be
filed within 60 days from date of service.

2

Introduction

The SKMCD1P Cream Dispenser is designed to hold and dispense bulk coffee cream. It will dispense three
portion sizes – 1 cream packet, 2 cream packets, or 3 cream packets.

Setup

Legs

The dispenser is shipped without legs attached. To install them, carefully tilt the unit and thread the legs into
the four corner holes on the bottom of the dispenser.

Drip Tray

The Drip Tray and Drip Tray Cover are installed as shown.

Location

When locating your cream dispenser, convenience and accessibility are important considerations, but the
following factors must be observed:

• When placing the unit on a counter, the counter must be able to support a minimum of 100 pounds.

• When placed on a counter, the unit must be on the feet supplied. If the feet are removed the unit will

not operate properly and the warranty will be void.

• There must be at least two inches of space above, on the sides and behind the unit and open in front.

• Correct serving height is important so that it can be operated properly.

• The unit must be level. The feet are adjustable to aid in leveling the unit.

• Avoid placing the unit next to an oven, heating element or hot air source which would affect the

performance of the unit.

Electrical Connections

Be sure to check the data plate, located on the liner of the cabinet, for required voltage prior to connecting
the unit to power. The specifications on the data plate supersede any future discussion.

The standard dispenser is equipped with a seven (7) foot power cord that requires a 115 Volt, 60 Cycle, 1
Phase properly grounded electrical receptacle protected with a 15 or 20 ampere fuse or breaker. The power
cord comes with a 3 prong plug for grounding purposes. Any attempt to cut off the grounding spike or to
connect to an ungrounded adapter plug will void the warranty, terminate the manufacturer’s responsibility
and could result in serious injury.

3