Functions
1. 2.4G Hz Free moving in 6-10 meters
2.Receiver storage space and carrying easily
3.Resolution frequency (800cpi–1
Specification
1. Wireless carrier frequency: 2,403MHz-2,479MHz
2.39 wireless working channels, automatic frequency jumping
3. Rated working current: 25mA
4. Maximum acceleration: 14 inches per second
5. Resolution: 800CPI-1200-1600CPI
Mouse install way as below:
T ake the mouse(as picture one)out。
First.
Second.Open the mouse battery cover,pu
1.Use big pollex press and move the battery cover back as picture one and two
2.Inside the battery as picture 3,the polarity as the battery box noted。
,200cpi–1,600cpi) conversion through CPI button.
t 2×AAA battery,close the battery cover。
3. Close the battery as picture4
Picture 3 Picture 4
Third. C
1. The computer will be freely af ter insert the rec
WINDOWS2000 or above。
Fourth、
1.Connect Nano receiver to Computers.
2.not need to connect again when replace battery。
Fifth、press mouse DPI key will be switch 800CPI-1200CPI- 1600CPI。
onnect computer with receiver。
Connect mouse to receiver。
Picture 1 picture 2
eiver to computer and the operation system is
FCC WARNNING
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1) this device may not cause harmful interfer
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation