King Pigeon SensorToCloud User Manual
1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud
IoT Series
Sensor To Cloud
User Manual
Version：1.1
Model：IOT1xx
Date：2019-08-15
All rights reserved by
King Pigeon Hi-Tech. Co., Ltd.
WWW.GPRS-M2M.COM
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
[Preface]
Date
Version
Revised instructions
2019-02-22
V1.0
The first version
2019-08-15
V1.1
Update model
Order
Model
I/O type
Communication
(Optional)
Communication Protocol
(Optional)
IOT100
RS485 Transparent Transmission
1: GSM/GPRS
2: 3G
3: 4G LTE
4: NB-IoT
1: Modbus RTU Over TCP
2: MQTT
IOT101
DIN: Digital Input
IOT102
DO: Digital Output-Open Collector
IOT103
AIN: 4~20mA / 0~5V Analog Input
IOT104
AM2301 Temperature & Humidity
Sensor Input
IOT105
DS18B20 Temperature Sensor Input
The device firmware model IOT10xyz is defined:
x stands for I/O type: = R stands for DO, = D stands for DIN, = A stands for 4~20mA, = V stands for
0~5V, = B stands for DS18B20, =M stands for AM2301 , = U stands for UART RS485;
y means of communication: = G means GSM/GPRS, = W means 3G, = L means 4G LTE, = N means of
NB-IoT;
z for communication protocol: = T for Modbus RTU over TCP, = M for MQTT;
Note: RS485 serial port type communication protocol is data transparent transmission, and the last digit of
its model is fixed to T.
For example, firmware model IOT10RWM indicates that the product is a DO output type, 3G
communication mode, MQTT communication protocol.
Thank you for using the Sensor To Cloud IoT Series device of King Pigeon Hi-Tech. Co., Ltd.
Reading this product description allows you to quickly grasp the function and use of this product.
[Copyright statement]
The ownership of this specification is owned by King Pigeon Hi-Tech. Co., Ltd. Without the written
permission of the company, no unit or individual has the right to reproduce, disseminate and copy any part
of the manual in any form, otherwise the offender will be at his own risk.
[Disclaimer]
The company cannot provide free upgrade services if the Device cannot continue to be used because
of the network upgrade of the operator. The company will not bear the consequences if the Device is
unable to work properly due to the interruption of the network services of the operators.
This product is mainly based on GSM/3G/4G network, please use it according to the parameters and
technical specifications provided in the specification, and please pay attention to the radio products,
especially GSM/3G/4G. The company does not bear property or personal injury caused by improper use of
the product.
[Document revision record]
[Device selection table]
Page2of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
Table of contents
1. Brief Introduction......................................................................................................................................5
2. Safety Note................................................................................................................................................5
3. Packing List...............................................................................................................................................5
4. Functional Characteristics.........................................................................................................................6
5. Technical parameters................................................................................................................................ 7
6. Device Description....................................................................................................................................8
6.1. Indicator Light Instructions.......................................................................................................... 8
6.2. Wiring instructions........................................................................................................................8
6.3. SIM Card Installation................................................................................................................... 9
7. Factory Data Reset....................................................................................................................................9
8. Configuration Software...........................................................................................................................10
8.1. Preparatory Work........................................................................................................................10
8.2. Configuration Software Functions Overview.............................................................................11
8.3. Basic Settings..............................................................................................................................11
8.4. Number Settings......................................................................................................................... 13
8.5. Network Settings.........................................................................................................................14
8.6. I/O Settings................................................................................................................................. 16
8.6.1. DO - Digital Output (Open Collector) Settings............................................................. 16
8.6.2. DIN - Digital Input Settings........................................................................................... 17
8.6.3. AIN - Analog Input Settings...........................................................................................18
8.6.4. DS18B20 Temperature Settings..................................................................................... 19
8.6.5. AM2301 Temperature & Humidity Settings.................................................................. 20
8.6.6. RS485 Settings................................................................................................................21
8.7. Timer Settings.............................................................................................................................22
8.8. Debug..........................................................................................................................................23
9. SMS Instructions.....................................................................................................................................23
9.1. Set new password........................................................................................................................24
9.2. Set the SIM card number............................................................................................................ 24
9.3. Set time of device....................................................................................................................... 24
9.4. Set the user Tel number.............................................................................................................. 24
9.5. Query device status.....................................................................................................................25
9.6. Set working mode.......................................................................................................................25
Page3of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
9.7. Set Device ID..............................................................................................................................25
9.8. Set network parameter of SIM card............................................................................................25
9.9. Set server parameters..................................................................................................................26
9.10. Enable/Disable network..............................................................................................................26
9.11. Set Login Message......................................................................................................................26
9.12. Set Heartbeat Message (only for Modbus protocol).................................................................. 26
9.13. Set the Heartbeat Interval........................................................................................................... 27
9.14. Set DO output parameters (only for DO output)........................................................................ 27
9.15. Set threshold high and low (only for AIN, DS18B20, AM2301 input).....................................27
9.16. Set the range of AIN (only for AIN input)................................................................................. 28
9.17. Calibrate the accuracy of AIN (only for AIN input).................................................................. 28
9.18. Delete cache data........................................................................................................................ 28
9.19. Reboot Device.............................................................................................................................29
9.20. Restore factory settings...............................................................................................................29
9.21. Set device language.................................................................................................................... 29
10. Transmission protocol.............................................................................................................................29
10.1. Modbus RTU protocol................................................................................................................ 29
10.1.1. Modbus address and example of DO types.................................................................... 29
10.1.2. Modbus address and example of DIN types...................................................................30
10.1.3. Modbus address and example of AIN types...................................................................31
10.1.4. Modbus address and example of DS18B20 types..........................................................31
10.1.5. Modbus address and example of AM2301 types........................................................... 32
10.2. MQTT Protocol...........................................................................................................................32
10.2.1. MQTT data format published by DO types....................................................................32
10.2.2. Data format of control DO published by server.............................................................33
10.2.3. MQTT data format published by DIN types.................................................................. 33
10.2.4. MQTT data format published by AIN types.................................................................. 34
10.2.5. MQTT data format published by DS18B20 types......................................................... 34
10.2.6. MQTT data format published by AM2301 types...........................................................34
11. Warranty..................................................................................................................................................35
12. Appendix A - SMS Instructions Table.................................................................................................... 35
Page4of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
1. Brief Introduction
Safety tips
Please do not use this product in places where it is forbidden to use mobile phones!
Wireless interference
This product uses GSM/3G/4G wireless network, please pay attention to wireless
interference!
The Sensor To Cloud IoT Series include DO - Digital Output (Open Collector), DIN - Digital Input,
AIN - 4~20mA Analog Input, AIN – 0~5V Analog Input , DS18B20 Temperature Sensor Input, AM2301
Temperature & Humidity Sensor Input, RS485 Transparent Transmission etc. I/O types of different
functions, optional GSM, GPRS, 3G, 4G, NB-IoT, etc. communication methods, support for Modbus RTU
Over TCP and MQTT communication protocols or data transparent transmission, covering most of the
applications to meet the different needs of users.
This product is compact and exquisite, powerful, and can choose the regular online working mode or
ultra low power working mode according to the need. It can choose the waterproof plastic shell for
industrial metal shell or outdoor use, acting as a complete finished product connection sensor monitors
data collection, remote control and abnormal warning notifications through SMS, phone, network, wechat,
web end and cloud platform. It can also be used as a PCBA module embedded in a third-party motherboard
for secondary development, to facilitate the traditional sensors, instruments and other rapid access to
objects such as networking.
2. Safety Note
3. Packing List
RTU x1, GSM/3G/4G antenna x1, specification (CD) x1, power adapter (DC 12V1.5A) x1
Note: SIM cards are not included in the list.
Optional Accessory:
DS18B20 temperature detector, length: 1m, 5m, 10m, 20m
AM2301 temperature and humidity detector, length: 1m, 5m, 20m
DIN 35mm rail fixed support:
Page5of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
4. Functional Characteristics
It can be used as a complete product or as a secondary development of the PCBA module.
Two modes of work are optional:
Normal mode: data transmission in real time, so that users can understand the situation on the
spot in a timely manner;
Low power mode: ultra low power source design (less than 230uA), suitable for the periodic
collection of recorded data sites;
A variety of communication options are available: GSM, GPRS, 3G, 4G, NB-IoT, etc.
Diversified functions: switch control, digital input monitoring, analog input monitoring, temperature
and humidity monitoring, RS485 serial communication, etc.
Support for setting parameters through SMS, computer configuration software, cloud platform(change
the configuration and viewing real-time data);
Supports 10 user numbers, each of which can be set up separately to receive specific alarm messages
and alarm calls;
Support 10 timer task: Inbuilt inter-lock logic programmer and powerful timer program function
Supports 2 different server centers that can set IP addresses or domain names;
Support for Modbus RTU Over TCP protocol and MQTT protocol or data transparent transmission;
Resend mechanism To ensure that each data is effectively uploaded to the server;
32M-bit storage to save historical data.
Wide working voltage design, support 7~24 VDC power supply, with anti-reverse connection
protection;
Built-in clock chips and super capacitors to ensure long-term timing after power outages;
Use the nano SIM card to support pin code verification and ensure the security of the card;
The optional metal shell or waterproof shell, can be installed and used in the house and outdoors.
Page6of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
5. Technical parameters
Item
Parameter range
Working voltage
Standard power supply 12V DC, support 7~24V DC
Power consumption
< 230uA in low power mode; 10mA~30mA in normal mode; Maximum
230-360mA (when making a phone call, it is related to the strength of the
signal; and the weaker the signal, the bigger the consumption)
Means of communication
Optional < GSM , GPRS, 3G, 4G, NB-IoT >
Communication protocol
Modbus RTU over TCP protocol, MQTT protocol, Data transparent transfer
SIM card
Nano SIM card
External antenna
SMA Antenna interface, 50 Ohm
USB
Micro USB interface
DO - digital output
OC type - open collector output, maximum load 1.5A/25V DC
DIN - digital input
Dry and wet contact compatible; wet contact 0~1V is close, 2~30V is open
AIN - analog input
4~20mA or 0~5V
AM2301 temperature and
humidity input
AM23001: temperature measuring range -40 to 80°C, precision ± 0.5°C,
humidity measuring range 0~99.9%RH, precision ±3%RH
DS18B20 temperature
input
DS18B20: temperature measurement range -55 to 125°C, precision ±
0.5°C
RS485 serial
communication
A single package transmitted through the RS485 serial port is up to 250
bytes.
Cache capacity
32M-bit / 4M-Byte（4,194,304 Bytes）
Working temperature
range
-10 to 60°C
Working humidity range
Maximum relative humidity 95% (condensation free)
Metal shell Size
54mm * 48mm * 19mm
Water Proof Shell Size
65mm * 45mm * 21mm
PCB Size
50.3mm * 36.8mm * 1.6mm
PCBA pin definition
When used as a PCBA module, there are 7 pins, starting from the JP1 mark:
Positive input pin, negative input pin, 1, 2, 3, signal indicator light pin, I/O
indicator light pin
(For the definition of 1, 2, and 3 pins, please refer to 6.2 Wiring
Instructions)
Page7of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
6. Device Description
Metal shell panel label
Waterproof shell panel label
Indicator instructions
Signal indicator light: flicker when just turned on, registration signal is long bright,
registration failure or no signal continues to blink.
I/O indicator light:
Blink when alarm of DIN digital input, AIN analog input, DS18B20 temperature input,
AM2301 temperature & humidity input, etc. Was triggered (Buzzers
follow) ,extinguished when recovery;
On when DO digital output type closed , Off when DO open;
Blink when RS485 is transmitting data.
Metal shell labels
Waterproof shell label
Wiring instructions
7~24 VDC IN
+
Red line
DC7~24V positive entry
-
Black line
DC7~24V negative entry
I/O wiring
(Different I/O types
need to distinguish
wiring)
1
Green line
negative line of DO
negative line of DIN
negative line of AIN (4~20mA or 0~5V)
GND line of DS18B20
GND line of AM2301
GND line of RS485(optional)
6.1. Indicator Light Instructions
6.2.
Wiring instructions
Page8of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
2
Yellow line
positive line of DO
positive line of DIN
positive line of AIN (4~20mA or 0~5V)
Data line of DS18B20
Data line of AM2301
Line A(DATA+) of RS485
3
White line
For VCC line of DS18B20
For VCC line of AM2301
For Line B(DATA-) of RS485
Ant
Antenna interface
6.3. SIM Card Installation
At the bottom of the indicator light is the self-propelled nano SIM card block, with the SIM card in
the direction of the chip down and the gap in the direction, and the side of the metal shell has an opening
that can insert the card directly. The waterproof shell needs to be opened to insert the card.
7. Factory Data Reset
Some methods to restore factory settings:
(1) connect the computer configuration software and reset it by the "Reset" button of the configuration
software;
(2) remote reset by sending the message instruction "password+RESET", if success to reset , you will get
the returning message.
(3) open the shell, you can see the only small button K1 (near the terminal block), long press the button 3
seconds during the device is powered on. If I/O indicator light is on for 3 seconds, that indicates a
successful reset (the I/O indicator light of the DO output model flash only one second to show
successful).
Page9of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
8. Configuration Software
This product provides special configuration software for configuration of parameters. Uses USB line
to connect the device to the PC, The operation of parameter setting, parameter export, parameter import,
device parameter query can be carried out quickly.
8.1. Preparatory Work
(1) Download the driver from
http://rtu-m2m.com/Download/Software/CP210x_Windows7_8_10_Drivers.zip and install it on the
computer, or finish the installation driver through third-party driver software;
(2) Download the Sensor To Cloud configuration software from the website WWW.GPRS-M2M.COM ,
and then unzip and run it;
(3) Insert the SIM card into the card seat of the device, and ensure that the connection is reliable, and
install the antenna at the same time;
(4) To connect the power supply to the input port of the device, pay attention to the positive and negative
pole not to be connected reverse;
(5) Use the USB line to connect the device to the computer;
(6) Turn on the device management of the computer, and if the connection is normal and the driver is
installed properly, the sign below appears.
(7) Run configuration software, select the port number seen in the device management, enter the device
password (the default password is 1234), click on the connection.
[Note] If the connection is not successful, please check whether the connection is secure and whether the
serial number and password are correct.
Page10of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
8.2.
[Read] Read the current configuration of the reading device before editing the parameters.
[Save] Save settings write the edited parameters to the device, and the edited parameters will only
take effect if they are saved.
[Load] To import the previously saved configuration file parameters into the device, you can
quickly configure the device.
[Export] Save the edited parameter configuration to the computer configuration file for the next
configuration.
[Reset] All parameters of the device will be restored to the factory default value after the factory is
clicked.
[Reboot] Restart the device immediately after clicking.
Configuration Software Functions Overview
8.3. Basic Settings
[Work Mode]
0: Normal Mode (default): the device would be online all the time.
1: Low Power Mode: the device would be offline until the something happened, such as the
alarm or timer task is triggered.
[Device ID]
Page11of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
GSM/GPRS/3G/4G/NB-IoT
Sensor To Cloud IoT Series
Device ID is mainly used for Modbus server center distinguishing device, range: 1~247, default 1.
[Device Description]
Up to 60 characters, this is a description of the Device, easy to identify the use of Device.
[Device Time]
[Read Device Time]: read device current time.
[Set Time]: write the setting time to the device, and this click will take effect immediately.
[Read Computer Time]: read computer current time.
[]Device New Password]
The device password can be modified here, fixed 4 digits, the default password is 1234.
[SIM Tel Number]
At most 22 bits
[Model]
Display the current device model and cannot be set.
[Firmware Version]
Displays the firmware version of the current device and cannot be set.
[IMEI]
The module IMEI code that displays the current device and cannot be set.
[SIM ICCID]
Displays the SIM card ICCID code in the current device, read empty without the card.
[Signal Value]
To show the current device signal value, the normal value of the signal 14~31, the greater the value
indicates the better signal. Less than 14 indicates weak signal, which may affect device communication.
[SIM PIN]
The PIN of the SIM card, 4 to 8 digits, if the SIM card is encrypted with the PIN code, fill in the
correct PIN code here to unlock it, Otherwise the device will not be able to use an encrypted SIM card.
Page12of
37
King Pigeon Hi-Tech. Co., Ltd Ver 1.1
Loading...