King of Fans 60KBRS User Manual

Item # 1001 xxx xxx
Model # 51608
ETL Model # 60-KBK

USE AND CARE GUIDE

KINGSBROOK 60-INCH CEILING FAN

Questions, problems, missing parts? Before returning to the store,

call Home Decorators Collection Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.

1-800-986-3460

HOMEDEPOT.COM/HOMEDECORATORS

THANK YOU

We appreciate the trust and condence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive

to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Home Decorators Collection!

Table of Contents

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try correct the interference by one or more of the following measures:

- Reorient the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Table of Contents ................................................................ 2

Safety Information...............................................................2

Warranty...............................................................................3

Pre-Installation ....................................................................3

Installation............................................................................ 6

Safety Information

READ AND SAVE THESE INSTRUCTIONS.

1. To reduce the risk of electric shock, ensure the electricity has
been turned off at the circuit breaker or fuse box before you
begin.

2. All wiring must be in accordance with the National Electrical
Code ANSI/NFPA 70 and local electrical codes. Electrical
installation should be performed by a qualied licensed
electrician.

3. The outlet box and support structure must be securely mounted
and capable of reliably supporting a minimum of 35 lbs. (15.9
kg). Use only UL-listed outlet boxes marked “Acceptable for
Fan Support of 35 lbs. (15.9 kg) or less.”

4. The fan must be mounted with a minimum of 7 ft (2.1 m) of
clearance from the trailing edge of the blades to the oor.

5. Do not place objects in the path of the blades.

6. To avoid personal injury or damage to the fan and other items,

use caution when working around or cleaning the fan.

7. After making electrical connections, spliced conductors should
be turned upward and pushed carefully up into the outlet box.
The wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the
outlet box.

8. All set screws must be checked and retightened where
necessary before installation.

Assembly.............................................................................. 7

Operation ...........................................................................14

Care and Cleaning.............................................................16

Troubleshooting................................................................. 16

WARNING: To reduce the risk of personal injury,
do not bend the blade brackets (also referred to as
anges) during assembly or after installation. Do
not insert objects in the path of the blades.

WARNING: To reduce the risk of re or electric
shock, do not use this fan with any solid-state speed
control device.

WARNING: To avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.

WARNING: To reduce the risk of re, electric shock
or personal injury, mount to outlet box marked
“Acceptable for fan support of 35 lbs. (15.9 kg) or
less”, and use screws provided with the outlet box.

WARNING: Electrical diagrams are for reference
only. If you are using a light kit, refer to the light kit
instructions manual to make the electrical
connections. Optional use of any light kit shall be
UL-listed and marked suitable for use with this fan.

WARNING: To reduce the risk of re or electric
shock, this fan should only be used with fan speed
control part no. XXXXXXX, manufactured by Satellite
Electronic Co., LTD.

WARNING: To reduce the risk of electric shock, this
fan must be installed with an isolating wall switch.

CAUTION: Changes or modications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.

This device complies with part 15 of the FCC rules, operation is subject to the following two conditions. (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: To reduce the risk of personal injury,

use only the screws provided with the outlet box.

CAUTION: Do NOT use this fan with a dimmer switch
or wall control. Using a dimmer switch or wall control
will damage the fan.

2

Warranty

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a
lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic
blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date
of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior
model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing
and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper installation or by afxing any
accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass nish,
including rusting, pitting, corroding, tarnishing, or peeling. Brass nishes of this type give their longest useful life when protected from varying
weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons
shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties,
including but not limited to those of merchantability and tness for a particular purpose to the extent permitted by law. The duration of any
implied warranty which cannot be disclaimed is limited to the time period as specied in the express warranty. Some states do not allow a
limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental,
consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by
law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you.
This warranty gives specic legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior
warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.

Pre-Installation

SPECIFICATIONS

Size Speed Volts

1

2 X.0 XXXX XXXX

3 X.0 XXXX XXXX

4 X.0 XXXX XXXX

60 in.

5 X.0 XXXX XXXX

6 X.0 XXXX XXXX

7 X.0 XXXX XXXX

8 X.0 XXXX XXXX

9 X.0 XXXX XXXX

120

Fan Power

Consumption

(without lights)

WATT

X.0 XXXX XXXX

Airow

CFM

Airow Efciency

(Higher Is Better)

CFM/WATT

Net

Weight

XX.XX lbs

(X.X kgs)

Gross

Weight

XX.XX lbs

(X.X kgs)

Cubic Feet

X.X pies³

(0.X m³)

NOTE: These are approximate measures. They do not

include the Amps and Wattage used by the light kit.

3

Please contact 1-800-986-3460 for further assistance.

HOMEDEPOT.COM/HOMEDECORATORS

Pre-Installation (continued)

TOOLS REQUIRED

Phillips
screwdriver

Step ladder

Flat blade
screwdriver

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA

Part Description Quantity

AA Blade attachment screws 25

BB Plastic wire connecting nut 3

Adjustable
wrench

BB

Electrical
tape

Wire cutter
/ Stripper

4

Pre-Installation (continued)

PACKAGE CONTENTS

A

F

G

B

C

D

H

I

E

Part Description Quantity

A

Slide-on mounting bracket
(inside canopy)

1

B Ball/downrod assembly 1

C Canopy with canopy ring attached 1

D Decorative motor collar cover 1

IMPORTANT: This product and/or components are

governed by one or more of the following U.S. Patents:
5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117
and other patents pending.

8H

2H 4H

J

Part Description Quantity

E Fan-motor assembly 1

F Blade 8

G Light kit pan 1

H Light kit tter assembly (LED included) 1

I Glass bowl 1

J Remote control (batteries included) 1

5

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Installation

MOUNTING OPTIONS

WARNING: To reduce the risk of re, electric shock
or personal injury, mount to outlet box marked
“Acceptable for fan support of 35 lbs. (15.9 Kg)
or less”, and use screws provided with the outlet
box. An outlet box commonly used for the support
of lighting xtures may not be acceptable for fan
support and may need to be replaced. If in doubt,
consult a qualied electrician.

If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:

Ƒ Disconnect the power by removing the fuses or turning off

the circuit breakers.

Ƒ Secure the outlet box directly to the building structure. Use

the appropriate fasteners and materials. The outlet box and
support structure must be securely mounted and capable of
reliably supporting a minimum of 35 lbs. (15.9kg). Use only
UL-listed outlet boxes marked

35 lbs. (15.9 Kg) or less”

The illustrations below show three different ways to mount the
outlet box.

“Acceptable for fan support of

Do not use a plastic outlet box.

NOTE: You may need a longer downrod to maintain

proper blade clearance when installing on a steep, sloped
ceiling. The maximum angle allowable is 30° away from
horizontal.

Hanger Bar

Outlet Box

If the canopy touches the downrod, then remove the decorative canopy
bottom cover, and turn the canopy 180° before attaching the canopy to
the mounting plate.

To hang your fan where there is an existing xture but no ceiling joist,
you may need an installation hanger bar as shown above

(available at any Home Depot store).

Recessed
Outlet
Box

Outlet Box

Outlet Box

Provide Strong
Support

Ceiling
Mounting
Plate

6

Assembly - Standard Ceiling Mount

Preparing for mounting

1

Ƒ Remove the canopy ring (EE) from the canopy (C) by turning

the ring counterclockwise until it unlocks.

Ƒ Remove the mounting bracket (A) from the canopy (C) by

loosening the two canopy screws (CC) located in the “L
shaped” slots.

Ƒ Remove and save the two canopy screws (DD) in the round

holes. This will enable you to remove the mounting bracket
(A).

CC

A

C

EE

DD

Routing the wires

2

Ƒ Route the wires exiting the top of the fan-motor

assembly (E) through the center of the canopy ring (EE).

Ƒ Insert the ball/downrod (B) through the canopy (C) and

slide the decorative motor collar cover (D) onto the end
of the ball/downrod (B). Make sure the slots on the
canopy (C) are on top.

Ƒ Route the wires exiting the top of the fan motor

assembly (E) through the downrod as shown.

C

EE

D

B

E

Assembling the fan

3

CAUTION: To ensure wobble-free operation and to avoid
damage to the fan, the downrod (B) and the setscrew
(HH) must be completely tightened

NOTE: This fan is equipped with a safety tab (GG). Should

the setscrew (HH) ever become loose while the fan is
running in reverse, the safety tab (GG) will engage and
stop the fan from falling.

Ƒ Remove the setscrew (HH) by turning it counterclockwise.
Ƒ Install the downrod (B) by inserting it into the motor collar (FF),

and turning it clockwise until it is tight.

Ƒ Reinstall the setscrew (HH) turning clockwise until tight.

B

HH

7

Please contact 1-800-986-3460 for further assistance.

HOMEDEPOT.COM/HOMEDECORATORS

FF
GG

E

Assembly - Hanging the Fan

Attaching the fan to the electrical

1

box

WARNING: To reduce the risk of re, electric shock or personal
injury, mount to outlet box marked “Acceptable for fan support
of 35 lbs. 15.9 kg) or less”, and use screws provided with the
outlet box.

NOTE: The mounting bracket (A) is designed to slide into place

on an outlet box with the outlet box screws (JJ) installed.

Ƒ Loosen the two mounting screws (JJ) in the outlet box.
Ƒ Pass the 120-Volt supply wires through the center hole in the

mounting bracket (A).

Ƒ Slide the mounting bracket (A) on to the mounting screws (JJ)

and center the mounting bracket (A) in relation to the outlet box.
If necessary, use leveling washers (not included) between the
slide-on mounting bracket (A) and the outlet box. The at side of
the slide-on mounting bracket (A) should face toward the outlet
box, as shown.

Ƒ Securely tighten the two mounting screws (JJ).

Hanging the fan

2

Ƒ Carefully lift the fan-motor assembly (E) up to the slide-on

mounting bracket (A).

Ƒ Insert the ball portion of the ball/downrod assembly into

the socket of the slide-on mounting bracket (A).

Ƒ Turn the ball/downrod assembly clockwise until it is seated

with the tab of the slide-on mounting bracket (A) aligned
with the slot in the ball.

A

B

C

D

E

JJ

JJ

A

8

Assembly - Hanging the Fan (continued)

Making the electrical connection

3

WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.

IMPORTANT: Use the plastic wire connectors (BB) supplied with

your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.

Black White

NOTE: The fan comes with 78 in. lead wires for use with an

extended ball/ downrod assembly. If using the 6 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your desired
length (no shorter than 12 in.)

Ƒ The fan comes with 78 in. lead wires for use with an extended

ball/ downrod assembly. If using the 6 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.). This will make extra
room in the canopy (C), if you do not wish to cut the wires,
you will need to neatly wrap them.

Ƒ Connect the fan motor green wires to the household green or

bare wire using a wire connecting nut (BB).

Ƒ Connect the fan motor white wires to the household white

wire using a wire connecting nut (BB).

Ƒ Connect the fan motor black wires to the household black

wire using a wire connecting nut (BB).

Ƒ Secure each wire connecting nut using electrical tape.
Ƒ Turn the wire connecting nut (BB) upward and push the wiring

into the outlet box (II).

Black White

Outlet box
in the ceiling II

Green or bare wire

Green

9

Please contact 1-800-986-3460 for further assistance.

HOMEDEPOT.COM/HOMEDECORATORS

Assembly - Hanging the Fan (continued)

Wrapping the extra wire

4

NOTE: Follow this step ONLY if you did not cut the extra length off

from the wires coming from the ceiling fan.

Ƒ Gently wrap the excess wire around the mounting bracket.
Ƒ Secure with electrical tape.

Mounting the fan-motor assembly

5

(standard mount)

WARNING: When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.

WARNING: The locking slots of ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and rmly tightened.

Ƒ Align the locking slots of the ceiling canopy (C) with the two

screws (CC) in the slide-on mounting bracket (A). Push up to
engage the slots, and turn clockwise to lock the canopy (C) in
place.

Ƒ Firmly tighten the two mounting screws (CC).
Ƒ Install the two mounting screws (saved from Assembly Step 1

“Preparing for mounting”) into the holes in the canopy (C) and
tighten rmly.

Ƒ Install the decorative canopy ring (EE) by aligning the ring’s

slots with the screws in the canopy (C). Rotate the canopy
ring (EE) counterclockwise to lock it in place.

A

CC

EE

C

E

10

Assembly - Hanging the Fan (continued)

Attaching the fan blades

5

Ƒ Attach a blade (F) to the fan-motor assembly (E) by inserting

the blade (F) into slots in the side of the fan motor housing
and aligning the three screw holes in the blade with the
holes in the center ywheel and secure with screws (AA).

Ƒ Make sure all the screws are rmly tightened.
Ƒ Repeat these steps for the remaining blades.

F

Assembly - Attaching the Accessories

Installing the light kit pan

1

E

AA

Ƒ Remove one screw (KK) from the black bracket below fan

motor assembly (E), and loosen but do not remove the other
two screws.

Ƒ Push the light kit pan (G) up to the fan motor assembly (E) so

that the two loosened screw heads t into the keyhole slots.
Turn the light kit pan (G) clockwise.

Ƒ Re-install the screw (KK) that was removed in step 1.
Ƒ Make sure all the screws are rmly tightened.

E

KK

G

11

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.