King of Fans 52RMGC2 User Manual

Item # 1002 705 999, 1002 717 208, 1002 706 115

USE AND CARE GUIDE

SOUTHWIND 52-INCH CEILING FAN

Model #91371, 91372, 91379

UL Model # 52-RMG

Questions, problems, missing parts? Before returning to the store call

Hampton Bay Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday

1-855-HD-HAMPTON

HAMPTONBAY.COM

To view an instructional video on how to install this product:

1. Go to www.homedepot.com and enter either the Item or Model number, found in the top
right corner of the cover of this instruction manual, in the search eld.

2. Click on your product from the list of search results and click on the video link in the
“Product Overview” section.

THANK YOU

We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Hampton Bay!

Table of Contents

Table of Contents ................................................................ 2

Safety Information ............................................................... 2

Warranty ............................................................................... 3

Pre-Installation ....................................................................3

Installation ............................................................................6

Safety Information

1. To reduce the risk of electric shock, ensure the electricity has

been turned off at the circuit breaker or fuse box before you
begin.

2.

All wiring must be in accordance with the National Electrical
Code ANSI/NFPA 70-1999 and local electrical codes. Electrical
installation should be performed by a qualified licensed
electrician.

The outlet box and support structure must be securely mounted

3.

and capable of reliably supporting a minimum of 35 lbs. (15.9
kg). Use only UL-listed outlet boxes marked “For Fan Support.”

4. The fan must be mounted with a minimum of 7 ft. (2.1 m)

clearance from the trailing edge of the blades to the oor.

Do not operate the reversing switch while the fan blades are

5.

in motion. You must turn the fan off and stop the blades before
you reverse the blade direction.

6.

Do not place objects in the path of the blades.

To avoid personal injury or damage to the fan and other items,

7.

use caution when working around or cleaning the fan.

8. Electrical diagrams are for reference only. Light kits that are

not packed with the fan must be UL listed and marked suitable
for use with the model fan you are installing. Switches must be
UL General Use Switches. Refer to the instructions packaged
with the light kits and switches for proper assembly.

After making electrical connections, spliced conductors should

9.

be turned upward and pushed carefully up into outlet box. The
wires should be spread apart with the grounded conductor and
the equipment-grounding conductor on one side of the outlet
box.

Assembly .............................................................................. 7

Operation ...........................................................................15

Care and Cleaning ............................................................. 16

Troubleshooting ................................................................. 16

WARNING: To reduce the risk of personal injury,
do not bend the blade brackets (also referred to as
anges) during assembly or after installation. Do not
insert objects in the path of the blades.

WARNING: Remove the rubber motor stops on
the bottom of the fan before installing the blades or
testing the motor.

WARNING: To reduce the risk of re or electric
shock, do not use this fan with any solid-state speed
control device.

WARNING: To avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed

electrician.

WARNING: Electrical diagrams are for reference
only. Optional use of any light kit shall be UL-listed
and marked suitable for use with this fan.

WARNING: To reduce the risk of re or electric
shock, this fan should only be used with fan speed
control part no. FAN28R-240W, manufactured by
Chia Wei Electric Co.,LTD.

CAUTION: To reduce the risk of personal injury,
use only the screws provided with the outlet box.

10. All setscrews must be checked and retightened where

necessary before installation.

2

Warranty

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a
lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic
blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date
of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior
model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing
and reinstalling the product are your responsibility. Damage to any part, such as by accident, misuse, improper installation, or by afxing any
accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass nish,
including rusting, pitting, corroding, tarnishing, or peeling. Brass nishes of this type give their longest useful life when protected from varying
weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons
shall render the warranty invalid. There is no other express warranty. Hampton Bay hereby disclaims any and all warranties, including but not
limited to those of merchantability and tness for a particular purpose to the extent permitted by law. The duration of any implied warranty
which cannot be disclaimed is limited to the time period as specied in the express warranty. Some states do not allow a limitation on how long
an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special
damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow
the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specic legal
rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any
return of product as part of a claim on the warranty must be paid by the customer.

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.

Pre-Installation

SPECIFICATIONS

Size Speed Volts Amps Watts RPM CFM

Low

52”

Medium

High

NOTE: These are approximate measures. They do not
include the Amps and Wattage used by the light kit.

120

0.30

0.41

0.52

11

27

59

60

105

160

TOOLS REQUIRED

Phillips
screwdriver

Flat blade
screwdriver

Adjustable
wrench

1446

2618

4087

Net

Weight

18.51 lbs.
(8.4 kg)

Electrical
tape

Gross

Weight

21.38 lbs.
(9.7 kg)

Cube Feet

1.78 cu. ft.

Wire
cutter

Step ladder

3

Please contact 1-855-HD-HAMPTON for further assistance.

HAMPTONBAY.COM

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA BB

EE

Part Description Quantity

AA Blade attachment hardware 16
BB Plastic wire connector 3
CC Hanger pin 1
DD Locking pin 1

FF

CC

Part Description Quantity

EE Extra plastic plug (to be used for fan

without light kit)

FF Extra blade bracket hardware (screw

and lock washer)

GG Close-to-ceiling mount hardware

(rubber gasket)

DD

GG

1

1

1

4

Pre-Installation (continued)

PACKAGE CONTENTS

A

B

C

D

G

H

I

J

F

E

Part Description Quantity

A Slide-on mounting bracket

(inside canopy)
B Ball/downrod assembly 1
C Canopy with canopy ring attached 1
D Fan-motor assembly 1
E Light kit tter assembly 1

IMPORTANT: This product and/or components are
governed by one or more of the following U.S. Patents:
5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117
and other patents pending.

1

K

Part Description Quantity

F Blade 5

G Blade bracket (ange), screws

pre-installed

H Glass bowl 1

I Light bulbs, 9.5-Watt maximum 2

J Transmitter (battery included) 1
K Receiver 1

5

Please contact 1-855-HD-HAMPTON for further assistance.

5

HAMPTONBAY.COM

Installation

MOUNTING OPTIONS

WARNING: To reduce the risk of re, electric shock,

or personal injury, mount the fan to an outlet box
marked ‘’acceptable for fan support of 35 lbs. (15.9
kg) or less’’, and use the screws provided with the
outlet box. An outlet box commonly used for the
support of lighting xtures may not be acceptable for
fan support and may need to be replaced. If in doubt,
consult a qualied electrician.

If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:

□ Disconnect the power by removing the fuses or turning off

the circuit breakers.
Secure the outlet box directly to the building structure.

□

Use the appropriate fasteners and materials. The outlet box
and its bracing must be able to fully support the weight
of the moving fan (at least 35 lbs.). Do not use a plastic
outlet box.

The illustrations below show three different ways to mount the
outlet box.

NOTE: You may need a longer downrod to maintain proper
blade clearance when installing on a steep, sloped
ceiling. The maximum angle allowable is 30° away from
horizontal.

Hanger bar

Outlet Box

If the canopy touches the downrod, then remove the decorative canopy
bottom cover and turn the canopy 180° before attaching the canopy to
the mounting plate.

To hang your fan where there is an existing xture but no ceiling joist,
you may need an installation hanger bar as shown above

(available at any Home Depot store).

Recessed
Outlet

x

Bo

Outlet Box

Outlet box

6

Assembly - Standard Ceiling Mount

Preparation for mounting

1

□ Remove the canopy ring (JJ) from the canopy (C) by turning the

ring counter clockwise until it unlocks.

□ Remove the mounting bracket (A) from the canopy (C) by

loosening the two canopy screws (HH) located in the “L shaped
slots”.

□ Remove and save the two canopy screws (II) in the round

holes. This will enable you to remove the mounting bracket (A).

HH

2

Routing the wires

□ Route the wires exiting the top of the fan motor (D) and

through the canopy ring (JJ).

□ Make sure the slot openings are on top and route the

wires through the canopy (C) and then through the ball/
downrod assembly (B).

A

JJ

B

II

C

D

Assembling the fan

3

WARNING: Failure to properly install the locking pin could
result in the fan becoming loose and possibly falling.

□ Loosen, but do not remove, the setscrew on the collar (P) on

top of the motor housing.

□ Align the holes at the bottom of the downrod (B) with the

holes in the collar (P) on top of the motor housing.

□ Carefully insert the hanger pin (CC) through the holes in the

collar (P) and downrod (B). Be careful not to jam the hanger
pin (CC) against the wiring inside the downrod (B).

□ Insert the locking pin (DD) through the hole near the end of

the hanger pin (CC) until it snaps into its locked position.

□ Re-tighten the setscrews on the collar (P) on top of the

motor housing.

JJ

P

CC

DD

D

7

Please contact 1-855-HD-HAMPTON for further assistance.

HAMPTONBAY.COM

Assembly - Close-To-Ceiling Mounting

Preparation for close to ceiling

1

mounting

□ Remove the canopy ring (JJ) from the canopy (C) by turning

the ring counter-clockwise until it unlocks.

□ Remove the mounting bracket (A) from the canopy (C) by

loosening the two canopy screws (HH) located in the “L
shaped slots”.

□ Remove and save the two canopy screws (II) in the round

holes. This will enable you to remove the mounting bracket
(A).

□ Remove the decorative canopy bottom cover (KK) from the

canopy (C) by depressing the three studs.

HH

Routing the wires

2

□ Remove three of the six screws and lock washers (LL)

(every other one) securing the motor collar (P) to the top of
the fan motor housing (D).

□ Route the wires exiting the top of the fan motor assembly

(D) through the rubber gasket (GG) aligning the holes in the
rubber gasket (GG) with the three screw holes in the fan­motor assembly (D).

□ Route the wires exiting the top of the fan motor assembly

(D) through the canopy ring (JJ), and the canopy (C) (make
sure the slot openings for the canopy ring and canopy are
on top). Place the canopy (C) over the collar (P) at the top of
the motor assembly (D).

A

II

C

□ Align the mounting holes with the holes in the motor (D)

and fasten, using the three screws and lock-washers (LL)
removed previously. Tighten the mounting screws securely.

C

KK

JJ

LL

LL

JJ

GG

P

D

8

Assembly - Hanging the Fan

Attaching the fan to the electrical

3 4

box

WARNING: To reduce the risk of re, electric shock,
or other personal injury, mount the fan to an outlet
box or supporting system marked acceptable for fan
support and use the mounting screws provided with
the outlet box.

□ Pass the 120-Volt supply wires through the center hole in the

mounting bracket (A).

□ Install the ceiling mounting plate on the outlet box by sliding

the mounting bracket (A) over the two screws (UU) provided with
the outlet box. If necessary, use leveling washers (not included)
between the mounting bracket (A) and the outlet box. Note that
the at side of the mounting bracket (A) is toward the outlet box.

□ Securely tighten the two mounting screws (UU).

□

□

Hanging the fan

WARNING: The hook as shown is only to balance fan
while attaching wiring. Failure to hang as shown may
result in hook breaking, causing the fan to fall. Hook
must pass from inside to outside of canopy.

Carefully lift the fan motor assembly (D) up to the mounting
bracket (A).

Seat the hanger ball portion of the ball/downrod assembly (B)
in the mounting bracket socket. Ensure that the tab on the
mounting bracket (A) socket is properly seated in the groove
in the hanger ball. If using close-to-ceiling mounting, hang the
fan on the hook provided by utilizing one of the holes at the
outer rim of the ceiling canopy.

A

C

UU

D

A

A

B

C

D

9

Please contact 1-855-HD-HAMPTON for further assistance.

HAMPTONBAY.COM

Assembly - Hanging the Fan (continued)

Setting the code on the

5

remote control and transmitter

NOTE: This remote is equipped with 16 code combinations. To
prevent possible interference from other remote units such
as garage door openers, car alarm or security system, simply
change the combination code but be sure that the codes on
both the hand held transmitter and receiver in the fan match.

NOTE: The battery will weaken with age and should be
replaced before leaking takes place as this will damage the
hand unit. Dispose of used battery properly and keep the
battery out of the reach of children.

Setting the code on the transmitter

□

a. Remove the battery cover. Press rmly below arrow and

slide battery cover off.

b. Slide code switches to your choice of up or down position

(factory setting is all up).

Setting the code on the receiver

□

a. Slide code switches to the same position as set on your

transmitter.

b. Install the 9 volt battery (included).
c. Replace battery cover on the transmitter.

Controller Model: FAN28R-240W

J

ON DIP

1 2 3 4

ZZ

K

Installing the receiver

6

WARNING: To reduce the risk of re or electric shock,
remember to disconnect power. The electrical wiring must
meet all local and national electrical code requirements.
The electrical source and fan must be 110/120 volt, 60Hz.
Do not use this product in conjunction with any variable wall
control. Incorrect wire connection can damage this receiver.

CAUTION: If other fan wires are a different color, have this
unit installed by a licensed electrician.

CAUTION: Do not install in a damp location or immerse
in water (For indoor use only). Do not pull on or cut leads
shorter. Do not drop or bump the unit.

□

Position the house supply wires (AAA) to one side of the
slide-on mounting bracket (A); position the fan wires (BBB)
to the opposite side.

□

Insert the narrow end of the receiver (K) (as shown, at side
towards the ceiling) into the slide-on mounting bracket until
it rests on top of the ball/downrod assembly.

K

BBB

A

AAA

C

B

10

Assembly - Hanging the Fan (continued)

Wiring the receiver to the

7

household wiring.

WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you feel
you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.

WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.

IMPORTANT: Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.

□

Spread the wires apart so that the green and white wires are
on one side of the outlet box and the black wire is on the other
side.

□

Connect the green fan wires to the household ground wire (this
may be a green or bare wire) using a wire connecting nut (BB).

□

Connect the receiver (K) black (or red) wire to the household
black (hot) wire using a wire connecting nut (BB).

□

Connect the receiver (K) white wire to the household white wire
(neutral) using a wire connecting nut (BB).

□

Secure each wire connecting nut using electrical tape.

Making the electrical connection

8

NOTE: The frequencies on your receiver and transmitter have
been preset at the factory. Before installing the receiver, make
sure the dip switches on the receiver and transmitter are set
to the same frequency. The dip switches on the transmitter are
located inside the battery compartment.

□ The fan comes with 54 in. lead wire for use with an extended

ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra room
in the canopy (C), if you do not wish to cut the wires, you will
need to neatly wrap them.

□ Connect the fan motor white wire to the receiver (K) white wire

using a wire connecting nut (BB).

□ Connect the fan motor black wire to the receiver (K) black wire

using a wire connecting nut (BB).

□ Connect the fan motor blue wire to the receiver (K) blue wire

using a wire connecting nut (BB).

□ Secure each wire connecting nut (BB) using electrical tape.
□ Turn the wire connecting nut (BB) upward and push wiring into

the outlet box (MM).

Outlet box
in the ceiling
(MM)

Black

Black

(or Red)

Green (or Bare)

White

White

Receiver
Antenna

K

Outlet Box

in the ceiling

(MM)

Green

BB (x3)

K

BB (x3)

Blue

Green

Receiver

Antenna

Black White

11

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly - Hanging the Fan (continued)

Mounting the fan - Standard

9

WARNING: When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.

Align the locking slots of the ceiling canopy (C) with the two

□

screws in the mounting bracket (A). Push up to engage the
slots and turn clockwise to lock in place.

Firmly tighten the two mounting screws.

□

Install the remaining two mounting screws into the holes in the

□

canopy (C) and tighten rmly.
Install the decorative canopy ring by aligning the ring’s slots

□

with the screws in the canopy (C). Rotate the ring counter­clockwise to lock in place.

A

HH

C

Close-to-Ceiling Mounting

WARNING: Locking slots of ceiling canopy are provided only as an
aid to mounting. Do not leave fan assembly unattended until all
four canopy screws are engaged and rmly tightened.

Carefully unhook the fan from the mounting bracket (A) and

□

align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (A). Push up to engage the
slots and turn clockwise to lock in place. Immediately tighten
the two mounting screws rmly.

Install the remaining two mounting screws into the holes in

□

the canopy (C) and tighten rmly.
Install the decorative canopy ring by aligning the ring’s

□

slots with the screws in the canopy (C). Rotate the ring
counter-clockwise to lock in place.

You may now proceed to attaching the fan blades.

□

A

HH

10

□

□

C

Wrapping the extra wire

NOTE: Follow this step ONLY if you did not cut the extra length off
from the wires coming from the ceiling fan to the receiver.

Gently wrap the excess wire around the mounting bracket,
under the receiver.

Secure with electrical tape.

12

Assembly - Attaching the Fan Blades

Attaching the blades to the blade

11

brackets

Attach a blade (F) to a blade bracket (G) by inserting screws

□

(AA) into the holes in the blade and through the blade
bracket. Note that the rubber washers are pre-attached to
the blade bracket.

Tighten each screw securely.

□

Repeat these steps for each blade (F) and blade bracket (G).

□

Fastening the blade assemblies to

12

the motor

Fasten the blade assembly to the motor (D) by inserting the

□

alignment post into the slot on the bottom of the motor and
tightening the blade bracket (G) screws. The blade bracket
screws are pre-installed into the blade bracket (G).

Repeat this step for the remaining blade assemblies.

□

AA

F

G

D

Assembly - Attaching the Lights

Attaching the light kit tter assembly

13

CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light xture.

NOTE: Notice the location of the fan’s slide switch. This is
the switch used to change the fan’s directional rotation.
For more information on the operation of this switch, see
Operating Your Fan and Remote Control on page 15.

□ Loosen the three screws on the switch cup cover of the light

kit tter assembly (E).

□ Connect the wires from the light kit tter assembly (E) to the

wires from the switch cup of the fan motor assembly (D) by
connecting the molded adaptor plugs together (blue to black,
white to white). Carefully tuck all wires and splices in the
switch cup.

□ Align the three screws on the switch cup cover of the light

kit tter assembly with the three key slots in the switch cup.
Make sure the notch in the switch cup cover of the light kit
tter assembly clears the reversing switch in the switch
cup. Position the light kit tter assembly on the switch cup
and turn it clockwise until it locks. Tighten the three screws
that were loosened in rst step to secure the light kit tter
assembly (E).

G

D

E

13

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly -Attaching the Lights (continued)

14

□

□

□
□

□

I

Installing the bulbs and attaching
the glass bowl

CAUTION: Do not over tighten the hex nut, overtightening the
hex nut may cause the glass to break.

Remove the rubber washer, hex nut, bottom cover and nial
from the threaded nipple of the light kit tter assembly (E).

With power off, install the two LED bulbs (Max. 9.5W,
included) (I) by screwing into the light bulb sockets.

Position the glass bowl (H) over the threaded nipple.
Re-install the rubber washer, hex nut and bottom cover to

the threaded nipple to secure the glass shade properly.
Re-install and tighten the nial.

D

E

Assembling the fan without the

15

light kit

□ In order to use the fan without the light kit, remove the switch

cup cover from the top of the light kit tter assembly (E) by
removing the center hex nut inside the switch cup cover, and
then thread the switch cup cover off of the threaded nipple
on the top of the light kit tter assembly (E). Remove three
screws.

□ Press the plastic plug (EE) (provided) into the center hole of the

switch cup cover.

□ Align the three screw holes in the switch cup cover with the

three key slots in the switch cup. Make sure the notch in the
switch cup cover clears the reversing switch in the switch cup.

□ Position the switch cup cover onto the switch cup and install

the three screws that were removed in rst step.

□ Turn the switch cup cover clockwise until it locks and tighten

the three screws.

H

EE

14

Operating Your Fan and Remote Control

Remote Control - Your fan is equipped with a remote control to operate
the speed and lights of your new ceiling fan. For more information
on how to install the remote control, see the remote control instruction
along with the remote control components.

Speed setting for warm or cool weather depends on factor such as the
room size, ceiling height, number of fans and so on.

The fan shipped from the factory with the reversing switch positioned
to circulate air downward. If airow is desired in the opposite direction,
turn your fan off and wait for the blades to stop turning, then slide the
reversing switch (located in switch cup) to opposite position, and turn
fan on again. The fan blades will turn in the opposite direction and
reverse airow.

1. Speed - The remote features Low, Med, Hi and Off buttons to select
the desired speed of operation and turn the fan On or Off.

2. Light - To control the light kit, the remote features a Light/Dimmer
button.

NOTE: Wait for fan to stop before reversing the direction of blade rotation.

Warm weather - (Forward) A downward airow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.

Cool weather - (Reverse) An upward air ow moves warm air off the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.

Operating the fan

High button = High speed
Medium button = Medium speed
Low button = Low speed
Off button = Power off
Light/Dimmer button = Dims light with memory

15

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Care and Cleaning

WARNING: Make sure the power if off before cleaning
your fan.

□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade

attachments twice a year. Make sure they are secure. It is not necessary to remove fan from ceiling.

□ Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage

the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the nish. The
plating is sealed with a lacquer to minimize discoloration or tarnishing.

□ You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a

light application of shoe polish.

□ You do not need to oil your fan. The motor has permanently lubricated sealed ball bearings.

Troubleshooting

Problem Solution

The fan will not start □ Check the main and branch circuit fuses or breakers.

□ Check the line wire connections to the fan and switch wire connections in the switch housing.
□ Check battery in transmitter.
□ Ensure you are in the normal range of 10-20 feet.
□ Ensure the dip switches settings are in the same on the transmitter and receiver.
□ Remember to turn power off power supply before checking the dip switches settings.

The fan is noisy □ Ensure all motor housing screws are snug.

□ Ensure the screws that attach the fan blade bracket to the motor hub are tight.
□ Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing.
□ Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during this time.
□ If you are using the Ceiling Fan light kit, ensure the screws securing the glassware are tight. Check that the light

bulbs are also secure.
□ Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling.
□ Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box.

The fan wobbles □ Check that all blade and blade arm screws are secure.

□ Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the

ceiling above the tip of one of the blades. Measure from a point on the center of each blade to the point on the

ceiling. Measure this distance. Rotate the fan until the next blade is positioned for measurement. Repeat for each

blade. Any measurement deviation should be within 1/8 in. Run the fan for ten minutes. If the fan continues to

wobble please contact Customer Service and a balancing kit will be sent to you at no charge.

16

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi­dential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION:
Any changes or modications not expressly approved by the grantee of this device could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Questions, problems, missing parts? Before returning to the store call

Hampton Bay Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday

1-855-HD-HAMPTON

HAMPTONBAY.COM

Retain this manual for future use.

Artículo Núm. 1002 705 999, 1002 717 208, 1002 706 115

Modelo Núm. 91371, 91372, 91379

UL Modelo Núm. 52-RMG

GUÍA DE USO Y MANTENIMIENTO

VENTILADOR DE TECHO GLENDALE, DE 1,32 m

¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda,

llama al servicio al cliente de Hampton Bay

De lunes a viernes, entre 8:00 a.m. y 7:00 p.m. (Este), y los sábados de 9:00 a.m. a 6:00 p.m. (Este).

1-855-HD-HAMPTON

HAMPTONBAY.COM

Para ver un video instructivo sobre cómo instalar este producto:

1. Ir a www.homedepot.com e introduzca el artículo o el número de modelo, que se
encuentra en la part superior esquina derecha de la portada de este manual de
instrucciones, en el campo de búsqueda.

2. Haga clic en su producto de la lista de resultados de búsqueda y hacer clic en el enlace
del video en el la sección "Descripción del producto".

GRACIAS POR TU COMPRA

Apreciamos la conanza que has depositado en Hampton Bay al comprar este ventilador de techo. Nos esforzamos para continuamente crear pro-

ductos de calidad diseñados para tu hogar. Visítanos en Internet para ver nuestra línea completa de productos disponibles para las necesidades de

mejoras de tu hogar. ¡Gracias por elegir Hampton Bay!

Índice

Índice .................................................................................... 2

Información de Seguridad .................................................. 2

Garantía ................................................................................ 3

Preinstalación ...................................................................... 3

Instalación ............................................................................6

Información de Seguridad

1. Para disminuir el riesgo de descarga eléctrica, asegúrate de
que la electricidad ha sido apagada en el cortacircuitos o la
caja de fusibles antes de comenzar la instalación.

2. Todo el cableado debe cumplir con el Código Nacional de
Electricidad “ANSI/NFPA 70-1999” y con los códigos locales
de electricidad. La instalación eléctrica debe ser hecha por un
electricista certicado y calicado.

3. La caja eléctrica y estructura de soporte deben montarse de
forma segura y tener capacidad para sostener de manera
conable un mínimo de 35 lb. (15.9 kg). Usa solamente cajas
eléctricas aprobadas por UL marcadas como “aprobada como
soporte de ventiladores”.

Ensamblaje ...........................................................................7

Operación ...........................................................................15

Cuidado y Mantenimiento .................................................16

Solución de problemas ..................................................... 16

ADVERTENCIA: Para reducir el riesgo de lesiones
personales, no dobles los soportes de las aspas
(también llamados “rebordes”) durante o después
de la instalación. No coloques objetos en la
trayectoria de las aspas.

ADVERTENCIA: Retira los topes de goma del motor
en la parte inferior del ventilador antes de instalar
las aspas o probar el motor.

ADVERTENCIA: Para reducir el riesgo de incendio o
descarga eléctrica, no utilices este ventilador con
ningún dispositivo de control de velocidad de estado
sólido.

4. El ventilador debe ir montado con un mínimo de 7 pies (2.1 m) de
separación entre el borde trasero de las aspas y el piso.

5. No operes el interruptor de reversa mientras las aspas del
ventilador estén en movimiento. Debes apagar el ventilador y
detener las aspas antes de revertir la dirección de las aspas.

6. No coloques objetos en la trayectoria de las aspas.

7. Para evitar lesiones físicas o daños al ventilador y otros
artículos, ten cuidado al limpiar o trabajar cerca del ventilador.

8. Los diagramas eléctricos son sólo para referencia. Los kits de
luces no empaquetados con el ventilador deben estar aproba­dos por UL y marcados como apropiados para ser usados con
el modelo de ventilador a instalar. Los interruptores deberán
estar clasicados por el UL como de Uso General. Consulta las
instrucciones adjuntas a los juegos de luces e interruptores
para obtener información sobre el montaje adecuado.

9. Después de concluir con las conexiones eléctricas, debes
voltear los conductores empalmados hacia arriba y empujarlos
con cuidado hacia dentro de la caja eléctrica. Los cables deben
estar separados, con el cable a tierra y el conductor a tierra del
equipo hacia uno de los lados de la caja eléctrica.

10. Todos los tornillos colocados se deben verificar y ajustar
donde sea necesario antes de la instalación.

ADVERTENCIA: Para evitar una posible descarga
eléctrica, asegúrate de que la electricidad esté
apagada en la caja de fusibles principal antes de
instalar el cableado. Si crees que no tienes suciente
experiencia o conocimientos para instalar el cableado
eléctrico, contrata a un electricista con licencia.

ADVERTENCIA: Los diagramas eléctricos son sólo
para referencia. El uso opcional de cualquier kit de
luces debe estar aprobado por UL y estar marcado
como adecuado para ser usado con este ventilador.

ADVERTENCIA: Para disminuir el riesgo de incendio
o descarga eléctrica este ventilador sólo debe ser
usado con un control de velocidad con el Núm. de
pieza FAN28R-240W, fabricado por Chia Wei Electric
Co., Ltd.

PRECAUCIÓN: Para reducir el riesgo de lesiones
físicas, usa sólo los tornillos incluidos con la caja
eléctrica.

2

Garantía

El proveedor garantiza de por vida, a partir de la fecha en que el comprador original lo adquiere, que el motor del ventilador no presenta defectos
de fabricación ni de material al momento en que es enviado desde la fábrica. El proveedor también garantiza por un período de un año, a partir de
la fecha de compra por el comprador original, que las demás piezas del ventilador, sin incluir ninguna aspa de vidrio o acrílico, no presentarán ningún
defecto de fabricación o de material en el momento de su salida de la fábrica. Acordamos reparar todos los defectos del tipo antes mencionado,
sin cargo alguno, o a nuestra discreción, reemplazar el producto por un modelo de calidad comparable o superior si el producto es devuelto. Para
obtener un servicio de garantía, debe presentar una copia del recibo como comprobante de compra. Todos los costos de retiro y reinstalación del
producto son su responsabilidad. Los daños a cualquiera de las piezas como resultado de accidentes, instalación o uso incorrectos o debidos a la
instalación de cualquier accesorio, no están cubiertos bajo esta garantía. Debido a que las condiciones climáticas pueden variar, esta garantía no
cubre ningún cambio en el acabado en bronce, incluyendo óxido, perforación, corrosión, manchas o descascaramiento. Los acabados en bronce de
este tipo tienen una vida útil más prolongada cuando se protegen de las condiciones climáticas cambiantes. Es normal cierta “oscilación” y no se
considerará una falla. Cualquier servicio técnico conducido por personas no autorizadas anulará la garantía. No hay ninguna otra garantía expresa.
Mediante la presente Hampton Bay se exime de cualquier garantía, incluyendo pero sin limitarse a aquellas de comercialización e idoneidad para un
n particular, de acuerdo a lo contemplado por la ley. La duración de cualquier garantía implícita que no se pueda eximir, está limitada al período de
tiempo especicado en la garantía explícita. Algunos estados no permiten una limitación en la duración de la garantía, por consiguiente la limitación
anterior puede no aplicarse a su caso. El minorista no será responsable por daños directos, indirectos o especiales que resulten o deriven del uso
o rendimiento del producto excepto en casos en que lo estipule la ley. Algunos estados no permiten la exclusión o limitación de daños directos o
indirectos, por lo que la limitación o exclusión anterior podría no aplicarse a usted. Esta garantía le otorga derechos legales especícos pero es
posible que también tenga otros derechos que varían de un estado a otro. Esta garantía sustituye todas las garantías anteriores. Los costos de envío
de cualquier devolución de productos hecha como parte de una reclamación de garantía deben ser pagados por el cliente.

Comunícate con el Equipo de Servicio al Cliente al 1-855-HD-HAMPTON or visit www.HamptonBay.com.

Pre-Instalación

ESPECIFICACIONES

Tamaño Velocidad Voltios Amperios Vatios RPM

Baja

52”

Media

Alta

NOTA: Estas medidas son aproximadas. No incluyen ni el
amperaje ni el vataje consumido por el kit de luces.

120

0.30

0.41

0.52

11

27

59

HERRAMIENTAS NECESARIAS

Destornillador
Phillips

Destornillador
plano

Llave
ajustable

60

105

160

PIES

CÚB. X

MIN.

1446

2618

4087

Peso
Neto

18.51 lbs.
(8.4 kg)

Cinta de
electricista

Peso

Bruto

21.38 lbs.
(9.7 kg)

Cortacables

Pies

Cúbicos

1.78 pies cu.

Escalera de tijera

3

Llama al 1-855-HD-HAMPTON para asistencia adicional.

HAMPTONBAY.COM