King of Fans 52BENTR1 User Manual

Download

Page 1

Item #xxxx xxx xxx, xxxx xxx xxx,

xxxx xxx xxx, xxxx xxx xxx

Model #51820, 51821, 51822, 51824

USE AND CARE GUIDE

BENTOYGA 52-INCH CEILING FAN

UL Model #52-BENT

Questions, problems, missing parts? Before returning to the store,

call Home Decorators Collection Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.

1-800-986-3460

HOMEDEPOT.COM/HOMEDECORATORS

To view an instructional video on how to install this product:

1. Go to www.homedepot.com and enter either the Item or Model number, found in the top right corner of the cover of this instruction manual, in the search eld.

2. Click on your product from the list of search results and click on the video link in the “Product Overview” section.

THANK YOU

We appreciate the trust and condence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive

to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Home Decorators Collection!

Page 2

Table of Contents

Table of Contents ................................................................ 2

Safety Information ............................................................... 2

Warranty ............................................................................... 3

Pre-Installation .................................................................... 3

Installation ............................................................................ 6

Safety Information

READ AND SAVE THESE INSTRUCTIONS.

1. To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin.

2. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70 and local electrical codes. Electrical installation should be performed by a qualied licensed electrician.

3. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lbs. (15.9 kg). Use only UL-listed outlet boxes marked “Acceptable for Fan Support of 35 lbs. (15.9 kg) or less.”

4. The fan must be mounted with a minimum of 7 ft (2.1 m) of clearance from the trailing edge of the blades to the oor.

5. Do not place objects in the path of the blades.

6. To avoid personal injury or damage to the fan and other items,

use caution when working around or cleaning the fan.

7. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

8. All set screws must be checked and retightened where necessary before installation.

Assembly .............................................................................. 7

Operation ........................................................................... 13

Care and Cleaning ............................................................. 14

Troubleshooting ................................................................. 14

WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as anges) during assembly or after installation. Do not insert objects in the path of the blades.

WARNING: To reduce the risk of re or electric shock, do not use this fan with any solid-state speed control device.

WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.

WARNING: Electrical diagrams are for reference only. If you are using a light kit, refer to the light kit instructions manual to make the electrical connections. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan.

WARNING: To reduce the risk of re or electric shock, this fan should only be used with fan speed control part no. UC7067RYGA, manufactured by Rhine Electronic Co., LTD.

WARNING: To reduce the risk of electric shock, this fan must be installed with an isolating wall switch.

CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box.

CAUTION: Do NOT use this fan with a dimmer switch or wall control. Using a dimmer switch or wall control will damage the fan.

CAUTION: Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Page 3

Warranty

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper installation or by afxing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass nish, including rusting, pitting, corroding, tarnishing, or peeling. Brass nishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties, including but not limited to those of merchantability and tness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specied in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specic legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.

Pre-Installation

SPECIFICATIONS

Size Speed Volts

Low

52 in.

Medium 31 3128 100

High 63 4711 74

NOTE: These are approximate measures. They do not include the Amps and Wattage used by the light kit.

120

TOOLS REQUIRED

Phillips screwdriver

Fan Power

Consumption

(without lights)

WAT T

14 2071 147

Flat blade screwdriver

Airow

CFM

Airow Efciency

(Higher Is Better)

CFM/WATT

Adjustable wrench

Net

Weight

19.03 lbs. (8.65 kg)

Electrical tape

Gross

Weight

21.72 lbs. (9.85 kg)

Cubic Feet

1.860 cu. ft.

Wire cutter / Stripper

Step ladder

Please contact 1-800-986-3460 for further assistance.

HOMEDEPOT.COM/HOMEDECORATORS

Page 4

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

AA Blade attachment screws 16

BB Plastic wire connecting nut 3

CC Blade arm hardware (screw and lockwasher) 16

DD Hanger pin 1

EE Clip 1

Page 5

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

B Ball/downrod assembly 1

C Canopy with canopy ring attached 1

D Decorative motor collar cover 1

E Fan motor assembly 1

F Blade 5

G Blade arm 5

Slide-on mounting bracket (inside canopy)

IMPORTANT: This product and/or components are governed by one or more of the following U.S. Patents: 5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117 and other patents pending.

Part Description Quantity

H Light kit pan 1

I LED light kit assembly 1

J Shatter resistant bowl 1

K 3-pin extension wire 1

L 2-pin extension wire 1

M Receiver 1

N Remote control (batteries included) 1

Please contact 1-800-986-3460 for further assistance.

HOMEDEPOT.COM/HOMEDECORATORS

Page 6

Installation

Recessed Outlet Box

Mounting

MOUNTING OPTIONS

WARNING: To reduce the risk of re, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting xtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualied electrician.

If your ceiling fan does not have an existing UL-listed mounting box, then install one using the following instructions:

□ Disconnect the power by removing the fuses or turning off

the circuit breakers.

□ Secure the outlet box directly to the building structure. Use

the appropriate fasteners and materials. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lbs. (15.9 kg). Use only UL-listed outlet boxes marked “Acceptable for fan support of 35 lbs. (15.9 kg) or less” Do not use a plastic outlet box.

The illustrations below show three different ways to mount the outlet box.

NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 30° away from horizontal.

Hanger Bar

Outlet Box

If the canopy touches the downrod, then remove the decorative canopy bottom cover, and turn the canopy 180° before attaching the canopy to the mounting plate.

To hang your fan where there is an existing xture but no ceiling joist, you may need an installation hanger bar as shown above

(available at any Home Depot store).

Outlet Box

Provide Strong Support

Outlet Box

Ceiling

Plate

Page 7

Assembly - Standard Ceiling Mount

Preparing for mounting

□ Remove the magnetic canopy bottom cover (FF) from the

canopy (C) by pulling it off.

□ Loosen the two canopy screws (GG) located in the bottom of

the mounting bracket (A).

□ Turn the mounting bracket (A) counterclockwise and lift up to

remove the mounting bracket from the canopy (C).

Routing the wires

NOTE: The fan comes with 12 in. lead wires for use with the provided 6 in. ball downrod assembly (B). If you wish to use longer downrod, attach the 3-pin extension wire (K) and 2-pin extension wire (L) to the fan by connecting the molded adaptor plugs from the extension wires to the 3-pin and 2-pin adaptor plugs from the fan.

□ Route the wires exiting the top of the fan motor assembly (E)

through the decorative motor collar cover (D) and then the center of the canopy bottom cover (FF).

□ Make sure the opening of canopy (C) is on top and insert the

ball/downrod (B) through the canopy (C).

□ Route the wires exiting the top of the fan motor assembly (E)

through the downrod as shown.

Assembling the fan

WARNING: Failure to properly install the hanger pin (DD) and clip (EE)could result in the fan becoming loose and possibly falling.

CAUTION: To ensure wobble-free operation and to avoid damage to the fan, the downrod (B) and the setscrew (GG) must be completely tightened.

□ Loosen, but do not remove, the setscrew (HH) on the motor collar

(II) on top of the fan motor assembly (E).

□ Slip downrod (B) into motor collar (II), aligning holes on both parts.

Insert hanger pin (DD) through holes on collar and downrod (B), then insert the clip (EE) into pin until it snaps into place.

□ Re-tighten the setscrew (HH) on the collar (II) on top of the fan

motor assembly (E).

Please contact 1-800-986-3460 for further assistance.

HOMEDEPOT.COM/HOMEDECORATORS

Page 8

Assembly - Hanging the Fan

Attaching the fan to the electrical box Hanging the fan

NOTE: The mounting bracket (A) is designed to slide into place on an outlet box with the outlet box screws (HH) installed.

□ Loosen the two mounting screws (JJ) in the outlet box. □ Pass the 120-Volt supply wires through the center hole in the

mounting bracket (A).

□ Slide the mounting bracket (A) on to the mounting screws (JJ)

and center the mounting bracket (A) in relation to the outlet box. If necessary, use leveling washers (not included) between the slide-on mounting bracket (A) and the outlet box. The at side of the slide-on mounting bracket (A) should face toward the outlet box, as shown.

□ Securely tighten the two mounting screws (JJ).

WARNING: The tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring and cause the fan to wobble.

□ Carefully lift the fan motor assembly (E) up to the slide-on

mounting bracket (A).

□ Insert the ball portion of the ball/downrod (B) assembly

into the socket of the slide-on mounting bracket (A).

□ Turn the ball/downrod assembly clockwise until it is seated

with the tab of the slide-on mounting bracket (A) aligned with the slot in the ball.

Page 9

Assembly - Hanging the Fan

Setting the code on the remote

control and receiver

NOTE: The frequencies on your receiver and hand unit have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and hand unit are set to the same frequency. The dip switches on the hand unit are located inside the battery compartment.

NOTE: The switch marked ON/DIM controls the dimming function of the lights: Set the switch to ON to disable the dimming function. Set the switch to DIM to enable the dimming function.

NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will damage the hand unit. Dispose of used battery properly and keep the battery out of the reach of children.

□ Remove the remote control (N) battery cover by pressing

rmly on the arrow and sliding the cover off.

□ Slide the dip switches (KK) to your choice of either up or

down. The factory setting is up.

□ Slide the dip switches (KK) on the receiver (M) to the same

position as set on the remote control (N).

□ Replace the battery cover on the remote control (N).

Installing the receiver

WARNING: To reduce the risk of re or electric shock, remember to disconnect power. The electrical wiring must meet all local and national electrical code requirements. The electrical source and fan must be 110/120 volt, 60Hz. Do not use this product in conjunction with any variable wall control. Incorrect wire connection can damage this receiver.

CAUTION: If other fan wires are a different color, have this unit installed by a licensed electrician.

CAUTION: Do not install the receiver in a damp location or immerse in water (For indoor use only). Do not pull on or cut the receiver leads shorter. Do not drop or bump the unit.

□ Position the house supply wires (AAA) to one side of the

slide-on mounting bracket (A); position the fan wires (LL and MM ) to the opposite side.

□ Insert the narrow end of the receiver (as shown, at side

towards the ceiling) into the slide-on mounting bracket until it rests on top of the ball/downrod assembly.

ONONDIM

DIP

1 2 3 4

AAA

DIP

ONONDIM

1 234

12V 23A

1 2 3ON4

DIP

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Page 10

Assembly - Hanging the Fan (continued)

Wiring the receiver to the household

wiring

WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use.

IMPORTANT: Use the wire connecting nuts (BB) supplied with your fan. Secure the connectors with electrical tape and ensure there are no loose strands or connections.

□ Spread the wires apart so that the green and white wires

are on one side of the outlet box and the black wire is on the other side.

□ Connect the green fan wires to the household ground wire

(this may be a green or bare wire) using a wire connecting nut (BB).

□ Connect the receiver (M) black (or red) wire to the household

black (hot) wire using a wire connecting nut (BB).

□ Connect the receiver (M) white wire to the household white

wire (neutral) wire using a wire connecting nut (BB).

□ Secure each wire connecting nut using electrical tape.

Wiring the fan to the receiver

□ If using the 6 in. ball downrod assembly (B) provided, wire the

receiver to the fan wires by connecting the molded adaptor plug from receiver (M) with molded adaptor of the fan motor assembly (E) together.

□ If you wish to use longer downrod, you can use the extension

lead wire (42 in.) (K) provided by connecting the mmolded adaptor together.

Outlet box in the ceiling (NN)

Receiver

Antenna

BB (x3)

Receiver (M)

Black

(or Red)

White

Outlet Box

in the ceiling

(NN)

Green (or Bare)

Green

Page 11

Assembly - Attaching the Fan Blade

Installing the blades to the blade

brackets

□ Attach a blade (F) to a blade bracket (G) by inserting blade

attachment screws (AA) through the holes in the blade and into the blade bracket.

□ Tighten each blade attachment screw (AA) securely. □ Repeat these steps for each blade (F) and blade bracket (G).

Attaching the blade assemblies to

the motor.

□ Insert the blade/blade bracket assembly (OO) through the hole

in the side of the center ywheel on the fan motor assembly (E), align the three screws holes in the blade bracket (G) with the screw holes in the center ywheel and secure with blade arm screws (CC).

□ Repeat this step for the remaining the blade assemblies.

Assembly - Attaching the Light Kit

Installing the light kit pan

□ Remove one screw (PP) from the black bracket below the fan

motor assembly (E), and loosen but do not remove the other two screws.

□ Push the light kit pan (H) up to the fan motor assembly (E) so

that the two loosened screw heads t into the keyhole slots. Turn the light kit pan (H) clockwise.

□ Re-install the screw (PP) that was removed in the rst step. □ Make sure all the screws are rmly tightened.

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Page 12

Assembly - Attaching the Light Kit (continued)

Attaching the light kit tter assembly

□ Remove one screw (QQ) from the light kit pan (H), and

loosen, but do not remove the other two screws.

□ Connect the wires from the light kit tter assembly (I) to the

wires exiting from the bottom of the fan motor assembly (E) by connecting the molded adaptor plugs together (black to blue, white to white). Carefully tuck all wires into the light kit pan (H).

□ Push the LED light kit tter assembly (I) up to the light

kit pan (H) so that the two loosened screw heads t into the keyhole slots. Turn the LED light kit tter assembly (I) clockwise to secure.

□ Re-install the screw (QQ) that was removed in the rst step. □ Make sure all the screws are rmly tightened.

Installing the shatter resistant bowl

WARNING: Do not overtighten when installing the shatter resistant bowl into the light kit. Allow the shatter resistant bowl to cool completely before removing.

□ Place the shatter resistant bowl (J) into the light kit pan (H),

aligning the three at areas on the top of the ange of the shatter resistant bowl (J) with the three raised dimples in the light kit pan (H). Turn the bowl clockwise until it stops.

Page 13

Operating Your Fan and Remote Control

Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan.

Speed setting for warm or cool weather depends on factors such as the room size, ceiling height, number of fans and so on.

The fan is shipped from the factory with the reversing switch (YY) positioned to circulate air downward. If airow is desired in the opposite direction, turn your fan off and wait for the blades to stop turning, then slide the reversing switch (located in top glass housing) to the opposite position, and turn the fan on again. The fan blades will turn in the opposite direction and reverse airow.

NOTE: Wait for the fan to stop before reversing the direction of the blade rotation.

Warm weather - (Forward) A downward airow creates a cooling effect. This allows you to set your air conditioner on a higher setting without affecting your comfort.

Cool weather - (Reverse) An upward airow moves warm air off of the ceiling. This allows you to set your heating unit on a lower setting without affecting your comfort.

Transmitter operation

NOTE: This remote is equipped with a 16-code combination. To prevent possible interference from or to other remote units such as garage door openers, car alarm or security system, change the combination code but be sure that the code on both the hand held transmitter and receiver in the fan are the same.

NOTE: Pressing on the middle of the light button, will turn on the uplight only.

Install a 12-V battery (included).

□ Remove the protective coating from the battery. □ Remove the battery cover from the remote control. □ Install the 12-Volt battery (included) into the battery compartment of

the remote control (N).

□ Replace the battery cover on the remote control. □ Press the desired button on the remote control (N) to operate the fan: □ “3” button: Press to turn the fan on and set the fan speed to high. □ “2” button: Press to turn the fan on and set the fan speed to me-

dium.

□ “1” button: Press to turn the fan on and set the fan speed to low. □ Power button (RR): Press to turn the fan off. □ Uplight button (SS): Press and release immediately to turn the

uplight on or off. Press and hold to dim or brighten the light to the desired level and then release.

□ Downlight button (TT): Press and release immediately

to turn the downlight on or off. Press and hold to dim or brighten the light to the desired level and then release.

Power Indicator will light when buttons are pushed

ON/High

ON/Medium

ON/Low

RR: Power OFF

SS: Up Light ON/OFF & Dimmer Function

TT: Down Light ON/OFF

& Dimmer Function

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Page 14

Care and Cleaning

WARNING: Make sure the power is off before cleaning your fan.

□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade

attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling.

□ Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage

the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the nish.

□ You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a

light application of shoe polish.

□ You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings.

Troubleshooting

Problem Solution

The fan will not start. □ Check the main and branch circuit fuses or breakers.

□ Check the line wire connections to the fan and switch wire connections in the switch housing. □ Check the battery in the remote control. □ Ensure you are in the normal range of 10-20 feet. □ Remember to turn off the power supply before checking the dip switch settings.

The fan is noisy. □ Ensure all motor housing screws are snug.

□ Ensure the screws that attach the fan blade bracket to the motor hub are tight. □ Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing. □ Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during this time. □ If you are using the Ceiling Fan light kit, ensure the screws securing the glassware are tight. Check that the light

bulbs are also secure. □ Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling. □ Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box.

The fan wobbles. □ Check that all blade and blade arm screws are secure.

□ Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on

the ceiling above the tip of one of the blades. Measure from a point on the center of the blade to the point on the

ceiling. Rotate the fan until the next blade is positioned for measurement, and measure from the same point on

each blade to the ceiling. Repeat for each blade. Any measurement deviation should be within 1/8 in. Run the fan

for ten minutes. If the fan continues to wobble please contact Customer Service and a balancing kit will be sent

to you at no charge.

Page 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Questions, problems, missing parts? Before returning to the store,

call Home Depot Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.

1-800-986-3460

HOMEDEPOT.COM/HOMEDECORATORS

Retain this manual for future use.