King Innovation 95104, 95110, 95125, 95135, 95145 Catalog Page

®

Aluminum to Copper (AL-CU)

Consumer Products Safety Commission (CPSC)
Approves AlumiConn® as a long-term repair
method for aluminum wiring

Catalog # Selling Unit

95104 Clam of 2

95110 Clam of 10

95125 Bag of 25

95135 Box of 100

95145 Box of 1000

95185 Box of 2500

UL LISTED INSTALLATION INSTRUCTIONS

IMPORTANT: Turn off power before installing or removing connector.
Product to be used in accordance with local and national codes.

1. Strip conductors 5/16”.

2. Insert conductor into wire port, fully seating conductor into port.

3. Tighten set screws to the torque indicated below, based on conductor size and material as
indicated. 10 in-lb #12 solid aluminum

15 in-lb #10 solid aluminum
15 in-lb all solid and stranded copper conductors

Do not over torque.

4. Once all conductors are installed, close lid taking care to verify latch is securely fastened.

AlumiConn Aluminum to Copper Lug

SUPERIOR QUALITY THROUGH...

• Secure, mechanical connection of conductors

• Provides more safety

300V WIRE SIZES

#12 - #10 Solid Aluminum
#18 - #10 Solid and Stranded Copper

UL 486C Listed to meet U.S.
and Canadian specifications
as a Pressure Screw Type Wire
Connector

3A. MANUFACTURER APPROVED ALTERNATE TORQUE METHOD FOR USE ON SOLID WIRE ONLY.*

Using a screwdriver, tighten set screw until it comes into contact with the solid conductor.
Note location of screwdriver slot and continue tightening the set screw as indicated below:
1 full turn #12-#10 solid aluminum

1/2 turn #18-#10 solid copper

*Alternate torque method is not associated with UL listing above.

.65

Measurements are represented in inches

PRODUCT SPECIFICATIONS & MEASUREMENTS

Max. Voltage: 300V
Wire Type: Copper/Aluminum
Wire Range: Min #18/Max #10
Temperature Rating: 105°C
Flammability Rating: V-2
Do not reuse
One conductor only per port

1.22

.77

Made in U.S.A.

AlumiConn® Aluminum to Copper Lug

Aluminum to Copper (AL-CU)

• Three ports allow conductors to remain separate, permitting the lug to:

- Provide lower resistance, therefore lower temperature

- Provide longer-term reliability

• One piece for easy installation

• Secure, mechanical lug designed for aluminum to copper (AL - CU) connections

• AlumiConn design features a tin plated lug with three ports and nickel-plated
compression screws

• Versus other products designed for aluminum to copper conductors, AlumiConn:

- Is a more cost-effective alternative for replacing aluminum electrical wire systems

- Offers a solution that makes pig-tailing easier and safer

• AlumiConn is suitable for multiple types of connections including:

- Aluminum to Aluminum

- Aluminum to Copper

- Copper to Copper

• Ports of connectors contain a layer of Corrosion Inhibitor
that provides resistance from oxidation.

Note: AL= Aluminum,
CU= Copper. Also note
that the ‘power out’ is
optional and not always
applicable, depending on
how your wiring is set up.

www.kinginnovation.com

(P) 800.633.0232
(F) 636.519.5410

50100-46 REV M 08/12