King Chuang Tech and Electronic KC0418A Users Manual

KC-0418A FM Transmitter instruction manual

This device complies with part 15 of the FCC Rules.

FM transmit is designed for the PSP console. When you go out by car, you can use it
conveniently, it can transmit the audio signal to your FM radio with your car or other
speaker system, you can enjoy the song with the car speaker system or other speaker
system. please read the manual before using this product.

Specification

1. Input: DC2.5v 25mA

2. FM transmit on FM channels 88.1MHz-107.9MHz

3. Memory up to FM frequencies

4. Operation range: 10-30 feet

5. LCD display panel with blue background color

6. Audio frequency range: 50Hz to 15KHz

7. Designed for ipod console

8. Recharge the ipod console and transmit the FM signal at the same time.

9. No extra power.

10. Power on and off automatically.

11. W x h x d:

12. weight:

. Usage Method Of the ipod console

1. Turn off the psp console

2. Remove the protect film on the beautiful cover

3. Insert the FM transmit to psp console

4. Press the up or down button, select the space transmit frequency.

5. Match your car radio to same frequency, then you will listen the song with your car
speaker system.

Note:

1. Do not dispose in fire

2. Do not insert it into other power socket

3. Do not insert inductor into output plug

FCC ID: SWJKC0418A
MADE IN CHINA

Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.

User Manual information:

“Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.”
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.