King Canada 8024, 8018, 8014 User Manual

plusplus

performanceperformance

WARRANTY INFORMATION

CORDLESS DRILL

2-YEAR

LIMITED WARRANTY

FOR THIS CORDLESS DRILL

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

LIMITED TOOL WARRANTY

KING CANADA makes every effort to ensure that this product meets high quality
and durability standards. KING CANADA warrants to the original retail consumer a
2-year limited warranty as of the date the product was purchased at retail and that
each product is free from defects in materials. Warranty does not apply to defects
due directly or indirectly to misuse, abuse, negligence or accidents, repairs or
alterations and lack of maintenance. KING CANADA shall in no event be liable for
death, injuries to persons or property or for incidental, special or consequential
damages arising from the use of our products. To take advantage of this warranty,
the product or part must be returned for examination by the retailer. Shipping and
handling charges may apply. If a defect is found, KING CANADA will either repair
or replace the product.

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED

WARRANTY FOR NON-COMMERCIAL USE.

14.4V
18V
24V

MODELS: 8014, 8018, 8024

INSTRUCTION MANUAL

COPYRIGHT © 2006 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.

GENERAL & SPECIFIC

SAFETY INSTRUCTIONS

BATTERY AND CHARGER

SAFETY INSTRUCTIONS

1. KNOW YOUR TOOL.

Read and understand the owners manual and labels affixed to the tool. Learn its application
and limitations as well as its specific potential hazards.

2. Don’t use battery-power tools in damp or wet locations or expose them to rain. Keep work
area well lit and provide adequate surrounding work space.

3. USE RIGHT TOOL.

Don’t force the tool or the attachment to do a job for which it was not designed.

4. MAINTAIN TOOL WITH CARE.

Keep tool clean for best and safest performance. Follow instructions for operation and
changing accessories.

5. USE RECOMMENDED ACCESSORIES.

Only use recommended accessories. Follow the instructions that accompany the accessories.
The use of improper accessories may cause hazards.

6. CHECK FOR DAMAGED PARTS.

Before further use of the tool, parts that are damaged should be carefully checked to ensure
they will operate properly and perform their intended function. Check for alignment of moving
parts, breakage of parts, mounting, and any other conditions that may affect its operation.
Parts which are damaged should be properly repaired or replaced.

7. USE PROPER SPEED.

A tool will do a better and safer job when operated at the proper speed.

8. WEAR PROPER APPAREL.

Do not wear loose clothing, gloves, neckties or jewelry (rings, watch) because they could get
caught in moving parts. Non-slip footwear is recommended. Wear protective hair covering to
contain long hair. Roll up long sleeves above the elbows.

9. ALWAYS WEAR SAFETY GLASSES.

Always wear safety glasses (ANSI Z87.1). Everyday eyeglasses only have impact resistant
lenses, they are

SPECIFIC SAFETY INSTRUCTIONS

NOT safety glasses. Also use a face or dust mask if operation is dusty.

Safety instructions for Performance Plus charger and batteries

1. Never attempt to open the charger for any reason or attempt to charge a battery which is
not designed for use with this charger.

2. Do not store in locations where the temperature may exceed 40˚C.

3. Charge only at ambient temperatures between 4˚C and 40˚C.

4. Charge only using the charger provided with the tool.

5. Under extreme conditions, battery leakage may occur. When you notice liquid on the

battery, proceed as follows:

• Carefully wipe the liquid off using a cloth. Avoid skin contact.

In case of skin or eye contact, follow the instructions below:
In case of skin contact, immediately rinse with water. Neutralise with a mild acid such as
lemon juice or vinegar. In case of eye contact, rinse abundantly with clean water for at least
10 minutes. Consult a physician.

6. Disconnect the battery pack from the tool or place the forward/reverse switch in the center
lock position before making any adjustments, changing accessories, or storing the tool.

7. Be careful not to drop, shake or strike the battery.

Fire hazard! Do not short the battery. Do not touch the terminals with any conductive
material. Do not store battery in a container with other metal objects such as nails, screws,
coins. The charger must be used in a well ventilated area.
Important: This charger is intended for indoor use only.

1. Only use the supplied charger to charge the batteries.

2. Never attempt to charge non-rechargeable batteries.

3. Have defective charger power cord replaced immediately.

4. Do not expose charger to rain or snow.

5. Do not open the charger.

6. Do not allow anything to cover or clog the charger vents.

1. Do not use tool

trigger is a potentially dangerous tool and must be repaired.

2. Only use sharp undammaged drill bits and properly fitting screwdriver bits.

3. Never use your battery-powered drill and charger in the vicinity of vapours and combustible

liquids.

4. Look for concealed electric cables, gas pipes and water pipes before drilling and screw­driving in walls.

5. Always set the Forward/Reverse switch to the center position (locked position) before
replacing drill bit, battery or transportation.

6. Only change the direction of rotation while the drill has come to a complete stop.

if trigger does not turn it on or off. A tool which can not be controlled with the

Protecting the Environment- Be responsible

Should you find one day that your tool needs replacement, or if it is of no further use to you,
think of the protection of the
environment. If you want to dispose of
the tool yourself, the batteries must be
removed and disposed of in
accordance with local regulations.
Take the batteries to your service
agent or a local recycling station.
Collected batteries will be recycled or
disposed of properly

.