KINGBRIGHT WP7083YD Service Manual
查询WP7083YD供应商
T-1 3/4 (5mm) SOLID STATE LAMP
Part Number: WP7083YD YELLOW
Features
zOUTSTANDING MATERIAL EFFICIENCY.
zRELIABLE AND RUGGED.
zI.C. COMPATIBLE.
zRoHS COMPLIANT.
Package Dimensions
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAF2462 REV NO: V.3 DATE: MAY/29/2007 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1101010018
Selection Guide
V
Iv (mcd)
Part No.
Dice Lens Type
@ 10mA
Min. Typ.
WP7083YD YELLOW (GaAsP/GaP) YELLOW DIFFUSED 1.8 8
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
iewing
Angle
2 θ 1/2
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
60°
λpeak Peak Wavelength Yellow 590
λD [1] Dominant Wavelength Yellow 588
Δλ1/2 Spectral Line Half-width Yellow 35
C Capacitance Yellow 20
F [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA
V
R Reverse Current Yellow
I
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
10 uA VR = 5V
nm I
nm I
nm I
pF V
F=20mA
F=20mA
F=20mA
F=0V;f=1MHz
Absolute Maximum Ratings at TA=25°C
Parameter Yellow Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAF2462 REV NO: V.3 DATE: MAY/29/2007 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1101010018
Loading...