KINGBRIGHT SC 08-11 RT 11SRWA(V6)

20.32mm (0.8INCH) SINGLE DIGIT
NUMERIC DISPLAY

P/N: SC08-11SRWA SUPER BRIGHT RED

Features



0.8 INCH DIGIT HEIGHT.



LOW CURRENT OPERATION.



EXCELLENT CHARACTER APPEARANCE.



EASY MOUNTING ON P.C. BOARDS OR SOCKETS.



I.C. COMPATIBLE.



CATEGORIZED FOR LUMINOUS INTENSITY.



MECHANICALLY RUGGED.



STANDARD : GRAY FACE, WHITE SEGMENT.



RoHS COMPLIANT.

Package Dimensions & Internal Circuit Diagram

Description

The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.

Notes:

1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.

2. Specifications are subject to change without notice.

SPEC NO: DSAB4320 REV NO: V.6 DATE: DEC/02/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1301000759

Selection Guide

Iv (ucd)

Part No. Dice Lens Type

SC08-11SRWA SUPER BRIGHT RED(GaAlAs) WHITE DIFFUSED 4700 24000

@ 10mA

Min. Typ.

Description

Common Cathode,Rt.

Hand Decimal.

Electrical / Optical Characteristics at T

Symbol Parameter Device Typ. Max. Test ConditionsUnits

λpeak

λD

∆λ1/2

C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz

VF Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA

IR Reverse Current Super Bright Red 10 uA VR = 5V

Absolute Maximum Ratings at T

Parameter Super Bright Red Units

Power dissipation 100 mW
DC Forward Current 30 mA
Peak Forward Current [1] 155 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 5 Seconds

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. 2mm below package base.

Peak Wavelength Super Bright Red 660 nm IF=20mA

Dominant Wavelength Super Bright Red 640 nm IF=20mA

Spectral Line Half-width Super Bright Red 20 nm IF=20mA

A=25°C

A=25°C

SPEC NO: DSAB4320 REV NO: V.6 DATE: DEC/02/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1301000759

Super Bright Red SC08-11SRWA

SPEC NO: DSAB4320 REV NO: V.6 DATE: DEC/02/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1301000759

PACKING & LABEL SPECIFICATIONS SC08-11SRWA

Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:

1. Wavelength: +/-1nm

2. Luminous intensity/ luminous flux: +/-15%

3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.

SPEC NO: DSAB4320 REV NO: V.6 DATE: DEC/02/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1301000759