14.2mm (0.56INCH) SINGLE DIGIT
NUMERIC DISPLAY
P/N: SA56-11GWA GREEN
Features
0.56 INCH DIGIT HEIGHT.
LOW CURRENT OPERATION.
EXCELLENT CHARACTER APPEARANCE.
EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
I.C. COMPATIBLE.
MECHANICALLY RUGGED.
STANDARD : GRAY FACE, WHITE SEGMENT.
RoHS COMPLIANT.
Package Dimensions & Internal Circuit Diagram
Description
The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
SPEC NO: DSAC0813 REV NO: V.8 DATE: NOV/29/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1301000542
Selection Guide
Iv (ucd)
Part No. Dice Lens Type
SA56-11GWA GREEN (GaP) WHITE DIFFUSED 1900 10500
@ 10mA
Min. Typ.
Description
Common Anode, Rt.
Hand Decimal.
Electrical / Optical Characteristics at T
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak
λD
∆λ1/2
C Capacitance Green 15 pF VF=0V;f=1MHz
VF Forward Voltage Green 2.2 2.5 V IF=20mA
IR Reverse Current Green 10 uA VR = 5V
Absolute Maximum Ratings at T
Parameter Green Units
Power dissipation 105 mW
DC Forward Current 25 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Peak Wavelength Green 565 nm IF=20mA
Dominant Wavelength Green 568 nm IF=20mA
Spectral Line Half-width Green 30 nm IF=20mA
A=25°C
A=25°C
SPEC NO: DSAC0813 REV NO: V.8 DATE: NOV/29/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1301000542
Green SA56-11GWA
SPEC NO: DSAC0813 REV NO: V.8 DATE: NOV/29/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1301000542
PACKING & LABEL SPECIFICATIONS SA56-11GWA
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nmV
2. Luminous intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAC0813 REV NO: V.8 DATE: NOV/29/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1301000542
Loading...