KINGBRIGHT LF59EMBGMBW, LF59EMBGMBC Datasheet

Kingbright

T-1 3/4 (5mm) FULL COLOR RGB LED LAMPS

®

LF59EMBGMBC HIGH EFFICIENCY RED / BLUE / GREEN

LF59EMBGMBW HIGH EFFICIENCY RED / BLUE / GREEN

Features

lTWO BLUE, ONE GREEN AND ONE RED CHIPS IN ONE

PACKAGE.

lCAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM,

INCLUDING WHITE LIGHT.

lWIDE VIEWING ANGLE FOR DIFFSUED LENS AND HIGH

INTENSITY FOR WATER CLEAR LENS.

Description

The Green source color devices are made with Gallium Phosphide
Green Light Emitting Diode.
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange Light
Emitting Diode.
The Blue source color devices are made with GaN on SiC Light Emitting
Diode.
Static electricity and surge damage the LEDS. It is recommended to use
a wrist band or anti-electrostatic glove when handing the LEDs.
All devices, equipment and machinery must be electrically grounded.

Selection Guide

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the lead emer­ ge package.

4. Specifications are subjected to change without notice.

Part No. Dice Lens Type

HIGH EFFICIENCY RED (GaAsP/GaP)

LF59EMBGMBC

LF59EMBGMBW

Note:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

BLUE(GaN) 12.5 40
GREEN (GaP) 50 150
BLUE(GaN) 12.5 40
HIGH EFFICIENCY RED (GaAsP/GaP)
BLUE(GaN) 3.2 12.5
GREEN (GaP) 10 70
BLUE(GaN) 3.2 12.5

WATER CLEAR

WHITE DIFFUSED

2-LF59-1

Iv (mcd)

@ 20 mA

Min. Max.

90 200

20 90

Viewing

Angle

2θ1/2

15°

30°

Electrical / Optical Characteristics at TA=25°C

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak

∆λ1/2

C

v

I

F

R

Peak Wavelength

Spectral Line

Halfwidth

Capacitance

Forward Voltage

High Efficiency Red
Green
Blue

High Efficiency Red
Green
Blue

High Efficiency Red
Green
Blue

High Efficiency Red
Green
Blue

Reverse Current All 10 uA VR = 5V

625
565
430

45
30
65

12

45

100

2.0

2.2

4.5

2.5

2.5

5.5

nm IF=20mA

nm IF=20mA

pF VF=0V;f=1MHz

V IF=20mA

Absolute Maximum Ratings at TA=25°C

Parameter High Efficiency Red Green Blue Units

Power dissipation 105 105 105 mW

DC Forward Current 30 25 30 mA

Peak Forward Current [1] 150 150 200 mA

Reverse Voltage 5 5 5 V

°C

°C

°C

Operating/Storage Temperature -40 To +85

Lead Soldering Temperature [2] 260 For 5 Seconds

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. 4mm below package base. \

2-LF59-2