KINGBRIGHT L-93WSRSGC-CC Service Manual

T-1 (3mm) BI-COLOR INDICATOR LAMP

Part Number: L-93WSRSGC-CC
SUPER BRIGHT RED
S UPER B RIGHT GREEN

Features

zUNIFORM LIGHT OUTPUT.
zLOW POWER CONSUMPTION.
z3 LEADS WITH ONE COMMON LEAD.
zI.C. COMPATIBLE.
zLONG LIFE - SOLID STATE RELIABILITY.
zRoHS COMPLIANT.

Package Dimensions

Description

The Super Bright Red source color devices are made
with Gallium Aluminum Arsenide Red Light Emitting
Diode.
The Super Bright Green source color devices are m ade
with Gallium Phosphide Green Light Emitting Diode.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

SPEC NO: DSAA8602 REV NO: V.6 DATE: APR/21/2007 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.ZHANG

Selection Guide

V

Part No.

L-93WSRSGC-CC

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

2. Luminous intensity/ luminous Flux: +/-15%.

SUPER BRIGHT RED (GaAlAs) 180 400
SUPER BRIGHT GREEN (GaP) 18 70

Dice Lens Type

WATER CLEAR

Iv (mcd) [2]

@ 20mA

Min. Typ.

iewing

Angle [1]

2 θ 1/2

50°

Electrical / Optical Characteristics at T

A=25°C

Symbol Parameter Device Typ. Max. Test Conditions Units

λpeak

λD [1]

Δλ1/2

Peak Wavelength

Dominant Wavelength

Spectral Line Half-width

C Capacitance

VF [2] Forward Voltage

IR Reverse Current

Notes:

1. Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

Absolute Maximum Ratings at T

Super Bright Red
Super Bright Green

Super Bright Red
Super Bright Green

Super Bright Red
Super Bright Green

Super Bright Red
Super Bright Green

Super Bright Red
Super Bright Green

Super Bright Red
Super Bright Green

A=25°C

660
565

640
568

20
30

45
15

1.85

2.2

nm IF=20mA

nm IF=20mA

nm IF=20mA

pF VF=0V;f=1MHz

2.5

2.5
10

10

V IF=20mA

uA VR = 5V

Parameter Super Bright Red Super Bright Green Units

Power dissipation 75 62.5 mW
DC Forward Current 30 25 mA
Peak Forward Current [1] 155 140 mA
Reverse Voltage 5 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. 2mm below package base.

3. 5mm below package base.

SPEC NO: DSAA8602 REV NO: V.6 DATE: APR/21/2007 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.ZHANG