
T-1 (3mm) SOLID STATE LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
LOW POWER CONSUMPTION.
POPULAR T-1 DIAMETER PACKAGE.
GENERAL PURPOSE LEADS
RELIABLE AND RUGGED.
LONG LIFE - SOLID STATE RELIABILITY.
AVAILABLE ON TAPE AND REEL.
RoHS COMPLIANT.
P/N: L-934MWC WHITE
Description
The source color devices are made with GaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAB8620 REV NO: V.4 DATE: APR/17/2006 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU

Selection Guid
e
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
Angle [1]
Min. Typ.
2θθθθ1/2
L-934MWC WHITE (GaN) WATER CLEAR 50 180
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity / Luminous Flux: +/-15%
Electrical / Optical Characteristics at T
A=25°C
50°
Symbol Parameter Device Typ. Max. Units Test Conditions
VF [1] Forward Voltage White 3.8 4.5 V IF=20mA
IR Reverse Current White 10 uA VR = 5V
X [2] White 0.33
Chromaticity Coordinates
Y [2] White 0.34
C Capacitance White 100 pF VF=0V;f=1MHz
Notes:
1.Forward Voltage: +/-0.1V.
2.Chromaticity Coordinates X, Y: +/-0.01.
Absolute Maximum Ratings at T
A=25°C
Parameter White Units
Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAB8620 REV NO: V.4 DATE: APR/17/2006 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU

White L-934MWC
SPEC NO: DSAB8620 REV NO: V.4 DATE: APR/17/2006 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU

L-934MWC
SPEC NO: DSAB8620 REV NO: V.4 DATE: APR/17/2006 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU