KINGBRIGHT L-934MBDL Service Manual

T-1 (3mm) SOLID STATE LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
DEVICES
Features
LOW POWER CONSUMPTION.
POPULAR T-1 DIAMETER PACKAGE.
GENERAL PURPOSE LEADS
RELIABLE AND RUGGED.
LONG LIFE - SOLID STATE RELIABILITY.
AVAILABLE ON TAPE AND REEL.
RoHS COMPLIANT.
P/N: L-934MBDL BLUE
Description
The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAF5899 REV NO: V.2 DATE: APR/17/2006 PAGE: 1 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU
Selection Guide
Viewing
Iv (mcd) [2]
Part No. Dice Lens Type
@ 20mA
Min. Typ. 2 θ
L-934MBDL BLUE (GaN) BLUE DIFFUSED 18 65
Notes:
θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
1.
2. Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak λD [1]
∆λ1/2
C Capacitance Blue 100 pF VF=0V;f=1MHz
VF [2] Forward Voltage Blue 3.8 4.5 V IF=20mA
Peak Wavelength Blue 430 nm IF=20mA
Dominant Wavelength Blue 466 nm IF=20mA
Spectral Line Half-width Blue 60 nm IF=20mA
Angle [1]
θ 1/2
θ θ
60°
IR Reverse Current Blue 10 uA VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at T
A=25°C
Parameter Blue Units
Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°CFor 3 Seconds
Lead Solder Temperature [3] 260°CFor 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAF5899 REV NO: V.2 DATE: APR/17/2006 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU
+ 1 hidden pages