KINGBRIGHT L-819SRSGC-CC User Manual

10mm ROUND LED LAMP

L-819SRSGC-CC SUPER BRIGHT RED

SUPER BRIGHT GREEN

Features

UNIFORM LIGHT OUTPUT.

•

LOW POWER CONSUMPTION.

•

3 LEADS WITH ONE COMMON CATHODE LEAD.

•

I.C. COMPATIBLE.

•

LONG LIFE - SOLID STATE RELIABILITY.

•

RoHS COMPLIANT.

•

Package Dimensions

Description

The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.
The Super Bright Green source color devices are made
with Gallium Phosphide Green Light Emitting Diode.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

SPEC NO: DSAC3324 REV NO: V.3 DATE: MAR/16/2005 PAGE: 1 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG

Selection Guid

Viewing

Part No. Dice Lens Type

L-819SRSGC-CC

Note:

1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

e

Iv (mcd)
@ 20mA

Min. Typ.

SUPER BRIGHT RED (GaAlAs) 280 600
SUPER BRIGHT GREEN (GaP) 70 150

WATER CLEAR

Electrical / Optical Characteristics at TA=25°C

Symbol Parameter Device Typ. Max. Test ConditionsUnits

λpeak

λD

∆λ1/2

C Capacitance

VF Forward Voltage

IR Reverse Current All 10 uA VR = 5V

Peak Wavelength

Dominant Wavelength

Spectral Line Half-width

Super Bright Red
Super Bright Green

Super Bright Red
Super Bright Green

Super Bright Red
Super Bright Green

Super Bright Red
Super Bright Green

Super Bright Red
Super Bright Green

660
565

640
568

20
30

45
15

1.85

2.2

2.5

2.5

nm IF=20mA

nm IF=20mA

nm IF=20mA

pF VF=0V;f=1MHz

V IF=20mA

Angle

2 θ

θ 1/2

θ θ

40°

Absolute Maximum Ratings at T

Parameter Super Bright Red Super Bright Green Units

Power dissipation 100 105 mW
DC Forward Current 30 25 mA

Peak Forward Current [1] 155 140 mA
Reverse Voltage V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. 2mm below package base.

3. 5mm below package base.

SPEC NO: DSAC3324 REV NO: V.3 DATE: MAR/16/2005 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG

A=25°C

5